EVOLUTION-MANAGER

Edit File: TNX.php65ce13

<?php

/**
 * Owl PHP Mailer by [owlmailer.io]
 * @version : 1.6
**/

session_start();
set_time_limit(0);
ini_set("memory_limit",-1);

header("Cache-Control: no-store, no-cache, must-revalidate, max-age=0");
header("Cache-Control: post-check=0, pre-check=0", false);
header("Pragma: no-cache");
header("Access-Control-Allow-Origin: *");

$password = "zilzal"; // Password 
$owl['version']="1.6";
$owl['website']="owlmailer.io";

if(isset($_POST['action']) && $_POST['action'] == "send"){
    $GLOBALS["recipient"] = owlTrim($_POST['recipient']);
    $GLOBALS["smtpAcct"] = owlTrim($_POST['smtpAcct']);
    $GLOBALS["senderName"] = owlTrim($_POST['senderName']);
    $GLOBALS["sendingMethod"] = owlTrim($_POST['sendingMethod']);
    $GLOBALS["senderEmail"] = owlTrim($_POST['senderEmail']);
    $GLOBALS["replyTo"] = owlTrim($_POST['replyTo']);

$messageLetter = owlTrim($_POST['messageLetter']);
    $messageLetter = urlencode($messageLetter);
    $messageLetter = preg_replace("/%5C%22/", "%22", $messageLetter);
    $messageLetter = urldecode($messageLetter);
    $GLOBALS["messageLetter"] = stripslashes($messageLetter);

$altMessageLetter = owlTrim($_POST['altMessageLetter']);
    $altMessageLetter = urlencode($altMessageLetter);
    $altMessageLetter = preg_replace("/%5C%22/", "%22", $altMessageLetter);
    $altMessageLetter = urldecode($altMessageLetter);
    $GLOBALS["altMessageLetter"] = stripslashes($altMessageLetter);

$GLOBALS["messageType"] = owlTrim($_POST['messageType']);
    $encodingType = owlTrim($_POST['encodingType']);
    $GLOBALS["encodingType"] = stripslashes($encodingType);
    $emailPriority = owlTrim($_POST['emailPriority']);
    $GLOBALS["emailPriority"] = stripslashes($emailPriority);
    $messageSubject = owlTrim($_POST['messageSubject']);
    $GLOBALS["messageSubject"] = stripslashes($messageSubject);

processEmailSendingRequest();
}

$sessioncode = md5(__FILE__);
if(!isset($_SESSION[$sessioncode]))
    $_SESSION[$sessioncode] = '';

if(!empty($password) && $_SESSION[$sessioncode] != $password){
    # _REQUEST mean _POST or _GET 
    if (isset($_REQUEST['pass']) and $_REQUEST['pass'] == $password) {
        $_SESSION[$sessioncode] = $password;
    }
    else {
        print "<pre align=center><form method=post>Password: <input type='password' name='pass'><input type='submit' value='>>'></form></pre>";
        exit;        
    }
}

function setSendingMethod()
{
  $mail = new PHPMailer;

if($GLOBALS["sendingMethod"] == "smtp")
  {
    $mail->IsSMTP();
    $parts = explode(':', $GLOBALS["smtpAcct"]);
    $mail->Host = owlTrim($parts[0]);
    $mail->Port = owlTrim($parts[1]);

if(owlTrim($parts[2]) == 'ssl')
      $mail->SMTPSecure = 'ssl';
    else if(owlTrim($parts[2]) == 'tls')
      $mail->SMTPSecure = 'tls';
    else
      $mail->SMTPSecure = '';

if(isset($parts[3]) && isset($parts[4]))
    {
        $mail->SMTPAuth = true;
        $mail->Username = owlTrim($parts[3]);
        $mail->Password = owlTrim($parts[4]);
    }

}
  return $mail;
}

function processEmailSendingRequest()
{
  if(!is_email($GLOBALS["recipient"]))
    exit("Incorrect Email");

$mail = setSendingMethod();
  $fromEmail = owlClear($GLOBALS["senderEmail"], $GLOBALS["recipient"]);
  $fromName = owlClear($GLOBALS["senderName"], $GLOBALS["recipient"]);
  $replyTo = owlClear($GLOBALS["replyTo"], $GLOBALS["recipient"]);
  $recipient = $GLOBALS["recipient"];
  $subject = owlClear($GLOBALS["messageSubject"], $GLOBALS["recipient"]);
  $body = owlClear($GLOBALS["messageLetter"], $GLOBALS["recipient"]);
  $altBody = owlClear($GLOBALS["altMessageLetter"], $GLOBALS["recipient"]);
  $charSet = $GLOBALS["encodingType"];
  $messageType = $GLOBALS["messageType"];
  $emailPriority = $GLOBALS["emailPriority"];
    
  $mail->setFrom($fromEmail, $fromName);
  
  if(isset($replyTo) && $replyTo !== "")
    $mail->addReplyTo($replyTo);
  
  $mail->addAddress($recipient);
  
  if(isset($subject) && $subject !== "")
    $mail->Subject = $subject;
    
  if(isset($body) && $body !== "")
    $mail->Body =  $body;
  
  if(isset($charSet) && $charSet !== "")  
    $mail->CharSet = $charSet;

if(isset($emailPriority) && $emailPriority !== "")  
    $mail->Priority = $emailPriority;

if(isset($altBody) && $altBody !== "")  
    $mail->AltBody = $altBody;
  
  if(isset($_FILES['attachment']))
  {
    for($i=0; $i<count($_FILES['attachment']['name']); $i++) {
        if ($_FILES['attachment']['tmp_name'][$i] != ""){
            $mail->AddAttachment($_FILES['attachment']['tmp_name'][$i],$_FILES['attachment']['name'][$i]);
        }
    }
  }

if($messageType == "html"){$mail->IsHTML(true);}
  else {$mail->IsHTML(false);}

if (!$mail->send()) {
      exit($mail->ErrorInfo);
  }
  else {
      exit("OK");
  }
}

function owlTrim($string){
  return stripslashes(ltrim(rtrim($string)));
}

function owlClear($text,$email){
    $emailuser = preg_replace('/([^@]*).*/', '$1', $email);
    $text = str_replace("[-time-]", date("m/d/Y h:i:s a", time()), $text);
    $text = str_replace("[-email-]", $email, $text);
    $text = str_replace("[-emailuser-]", $emailuser, $text);
    $text = str_replace("[-randomletters-]", randString('abcdefghijklmnopqrstuvwxyz', 8, 9), $text);
    $text = str_replace("[-randomstring-]", randString('abcdefghijklmnopqrstuvwxyz0123456789', 8, 9), $text);
    $text = str_replace("[-randomnumber-]", randString('0123456789', 7, 9), $text);
    $text = str_replace("[-randommd5-]", md5(rand()), $text);
    return $text;
}

function randString($consonants, $min_length, $max_length) {
    $length=rand($min_length, $max_length);
    $password = '';
    for ($i = 0; $i < $length; $i++) {
            $password .= $consonants[(rand() % strlen($consonants))];
    }
    return $password;
}

function is_email($input) {
  $email_pattern = "/^([a-zA-Z0-9\-\_\.]{1,})+@+([a-zA-Z0-9\-\_\.]{1,})+\.+([a-z]{2,4})$/i";
  if(preg_match($email_pattern, $input)) return TRUE;
}

/**
 * PHPMailer - PHP email creation and transport class.
 *
 * @author  Marcus Bointon (Synchro/coolbru) <phpmailer@synchromedia.co.uk>
 * @author  Jim Jagielski (jimjag) <jimjag@gmail.com>
 * @author  Andy Prevost (codeworxtech) <codeworxtech@users.sourceforge.net>
 * @author  Brent R. Matzelle (original founder)
 */
class PHPMailer
{
    const CHARSET_ISO88591 = 'iso-8859-1';
    const CHARSET_UTF8 = 'utf-8';
    const CONTENT_TYPE_PLAINTEXT = 'text/plain';
    const CONTENT_TYPE_TEXT_CALENDAR = 'text/calendar';
    const CONTENT_TYPE_TEXT_HTML = 'text/html';
    const CONTENT_TYPE_MULTIPART_ALTERNATIVE = 'multipart/alternative';
    const CONTENT_TYPE_MULTIPART_MIXED = 'multipart/mixed';
    const CONTENT_TYPE_MULTIPART_RELATED = 'multipart/related';
    const ENCODING_7BIT = '7bit';
    const ENCODING_8BIT = '8bit';
    const ENCODING_BASE64 = 'base64';
    const ENCODING_BINARY = 'binary';
    const ENCODING_QUOTED_PRINTABLE = 'quoted-printable';
    /**
     * Email priority.
     * Options: null (default), 1 = High, 3 = Normal, 5 = low.
     * When null, the header is not set at all.
     *
     * @var int
     */
    public $Priority;
    /**
     * The character set of the message.
     *
     * @var string
     */
    public $CharSet = self::CHARSET_ISO88591;
    /**
     * The MIME Content-type of the message.
     *
     * @var string
     */
    public $ContentType = self::CONTENT_TYPE_PLAINTEXT;
    /**
     * The message encoding.
     * Options: "8bit", "7bit", "binary", "base64", and "quoted-printable".
     *
     * @var string
     */
    public $Encoding = self::ENCODING_8BIT;
    /**
     * Holds the most recent mailer error message.
     *
     * @var string
     */
    public $ErrorInfo = '';
    /**
     * The From email address for the message.
     *
     * @var string
     */
    public $From = 'root@localhost';
    /**
     * The From name of the message.
     *
     * @var string
     */
    public $FromName = 'Root User';
    /**
     * The envelope sender of the message.
     * This will usually be turned into a Return-Path header by the receiver,
     * and is the address that bounces will be sent to.
     * If not empty, will be passed via `-f` to sendmail or as the 'MAIL FROM' value over SMTP.
     *
     * @var string
     */
    public $Sender = '';
    /**
     * The Subject of the message.
     *
     * @var string
     */
    public $Subject = '';
    /**
     * An HTML or plain text message body.
     * If HTML then call isHTML(true).
     *
     * @var string
     */
    public $Body = '';
    /**
     * The plain-text message body.
     * This body can be read by mail clients that do not have HTML email
     * capability such as mutt & Eudora.
     * Clients that can read HTML will view the normal Body.
     *
     * @var string
     */
    public $AltBody = '';
    /**
     * An iCal message part body.
     * Only supported in simple alt or alt_inline message types
     * To generate iCal event structures, use classes like EasyPeasyICS or iCalcreator.
     *
     * @see http://sprain.ch/blog/downloads/php-class-easypeasyics-create-ical-files-with-php/
     * @see http://kigkonsult.se/iCalcreator/
     *
     * @var string
     */
    public $Ical = '';
    /**
     * The complete compiled MIME message body.
     *
     * @var string
     */
    protected $MIMEBody = '';
    /**
     * The complete compiled MIME message headers.
     *
     * @var string
     */
    protected $MIMEHeader = '';
    /**
     * Extra headers that createHeader() doesn't fold in.
     *
     * @var string
     */
    protected $mailHeader = '';
    /**
     * Word-wrap the message body to this number of chars.
     * Set to 0 to not wrap. A useful value here is 78, for RFC2822 section 2.1.1 compliance.
     *
     * @see static::STD_LINE_LENGTH
     *
     * @var int
     */
    public $WordWrap = 0;
    /**
     * Which method to use to send mail.
     * Options: "mail", "sendmail", or "smtp".
     *
     * @var string
     */
    public $Mailer = 'mail';
    /**
     * The path to the sendmail program.
     *
     * @var string
     */
    public $Sendmail = '/usr/sbin/sendmail';
    /**
     * Whether mail() uses a fully sendmail-compatible MTA.
     * One which supports sendmail's "-oi -f" options.
     *
     * @var bool
     */
    public $UseSendmailOptions = true;
    /**
     * The email address that a reading confirmation should be sent to, also known as read receipt.
     *
     * @var string
     */
    public $ConfirmReadingTo = '';
    /**
     * The hostname to use in the Message-ID header and as default HELO string.
     * If empty, PHPMailer attempts to find one with, in order,
     * $_SERVER['SERVER_NAME'], gethostname(), php_uname('n'), or the value
     * 'localhost.localdomain'.
     *
     * @var string
     */
    public $Hostname = '';
    /**
     * An ID to be used in the Message-ID header.
     * If empty, a unique id will be generated.
     * You can set your own, but it must be in the format "<id@domain>",
     * as defined in RFC5322 section 3.6.4 or it will be ignored.
     *
     * @see https://tools.ietf.org/html/rfc5322#section-3.6.4
     *
     * @var string
     */
    public $MessageID = '';
    /**
     * The message Date to be used in the Date header.
     * If empty, the current date will be added.
     *
     * @var string
     */
    public $MessageDate = '';
    /**
     * SMTP hosts.
     * Either a single hostname or multiple semicolon-delimited hostnames.
     * You can also specify a different port
     * for each host by using this format: [hostname:port]
     * (e.g. "smtp1.example.com:25;smtp2.example.com").
     * You can also specify encryption type, for example:
     * (e.g. "tls://smtp1.example.com:587;ssl://smtp2.example.com:465").
     * Hosts will be tried in order.
     *
     * @var string
     */
    public $Host = 'localhost';
    /**
     * The default SMTP server port.
     *
     * @var int
     */
    public $Port = 25;
    /**
     * The SMTP HELO of the message.
     * Default is $Hostname. If $Hostname is empty, PHPMailer attempts to find
     * one with the same method described above for $Hostname.
     *
     * @see PHPMailer::$Hostname
     *
     * @var string
     */
    public $Helo = '';
    /**
     * What kind of encryption to use on the SMTP connection.
     * Options: '', 'ssl' or 'tls'.
     *
     * @var string
     */
    public $SMTPSecure = '';
    /**
     * Whether to enable TLS encryption automatically if a server supports it,
     * even if `SMTPSecure` is not set to 'tls'.
     * Be aware that in PHP >= 5.6 this requires that the server's certificates are valid.
     *
     * @var bool
     */
    public $SMTPAutoTLS = true;
    /**
     * Whether to use SMTP authentication.
     * Uses the Username and Password properties.
     *
     * @see PHPMailer::$Username
     * @see PHPMailer::$Password
     *
     * @var bool
     */
    public $SMTPAuth = false;
    /**
     * Options array passed to stream_context_create when connecting via SMTP.
     *
     * @var array
     */
    public $SMTPOptions = [];
    /**
     * SMTP username.
     *
     * @var string
     */
    public $Username = '';
    /**
     * SMTP password.
     *
     * @var string
     */
    public $Password = '';
    /**
     * SMTP auth type.
     * Options are CRAM-MD5, LOGIN, PLAIN, XOAUTH2, attempted in that order if not specified.
     *
     * @var string
     */
    public $AuthType = '';
    /**
     * An instance of the PHPMailer OAuth class.
     *
     * @var OAuth
     */
    protected $oauth;
    /**
     * The SMTP server timeout in seconds.
     * Default of 5 minutes (300sec) is from RFC2821 section 4.5.3.2.
     *
     * @var int
     */
    public $Timeout = 300;
    /**
     * Comma separated list of DSN notifications
     * 'NEVER' under no circumstances a DSN must be returned to the sender.
     *         If you use NEVER all other notifications will be ignored.
     * 'SUCCESS' will notify you when your mail has arrived at its destination.
     * 'FAILURE' will arrive if an error occurred during delivery.
     * 'DELAY'   will notify you if there is an unusual delay in delivery, but the actual
     *           delivery's outcome (success or failure) is not yet decided.
     *
     * @see https://tools.ietf.org/html/rfc3461 See section 4.1 for more information about NOTIFY
     */
    public $dsn = '';
    /**
     * SMTP class debug output mode.
     * Debug output level.
     * Options:
     * * `0` No output
     * * `1` Commands
     * * `2` Data and commands
     * * `3` As 2 plus connection status
     * * `4` Low-level data output.
     *
     * @see SMTP::$do_debug
     *
     * @var int
     */
    public $SMTPDebug = 0;
    /**
     * How to handle debug output.
     * Options:
     * * `echo` Output plain-text as-is, appropriate for CLI
     * * `html` Output escaped, line breaks converted to `<br>`, appropriate for browser output
     * * `error_log` Output to error log as configured in php.ini
     * By default PHPMailer will use `echo` if run from a `cli` or `cli-server` SAPI, `html` otherwise.
     * Alternatively, you can provide a callable expecting two params: a message string and the debug level:
     *
     * ```php
     * $mail->Debugoutput = function($str, $level) {echo "debug level $level; message: $str";};
     * ```
     *
     * Alternatively, you can pass in an instance of a PSR-3 compatible logger, though only `debug`
     * level output is used:
     *
     * ```php
     * $mail->Debugoutput = new myPsr3Logger;
     * ```
     *
     * @see SMTP::$Debugoutput
     *
     * @var string|callable|\Psr\Log\LoggerInterface
     */
    public $Debugoutput = 'echo';
    /**
     * Whether to keep SMTP connection open after each message.
     * If this is set to true then to close the connection
     * requires an explicit call to smtpClose().
     *
     * @var bool
     */
    public $SMTPKeepAlive = false;
    /**
     * Whether to split multiple to addresses into multiple messages
     * or send them all in one message.
     * Only supported in `mail` and `sendmail` transports, not in SMTP.
     *
     * @var bool
     */
    public $SingleTo = false;
    /**
     * Storage for addresses when SingleTo is enabled.
     *
     * @var array
     */
    protected $SingleToArray = [];
    /**
     * Whether to generate VERP addresses on send.
     * Only applicable when sending via SMTP.
     *
     * @see https://en.wikipedia.org/wiki/Variable_envelope_return_path
     * @see http://www.postfix.org/VERP_README.html Postfix VERP info
     *
     * @var bool
     */
    public $do_verp = false;
    /**
     * Whether to allow sending messages with an empty body.
     *
     * @var bool
     */
    public $AllowEmpty = false;
    /**
     * DKIM selector.
     *
     * @var string
     */
    public $DKIM_selector = '';
    /**
     * DKIM Identity.
     * Usually the email address used as the source of the email.
     *
     * @var string
     */
    public $DKIM_identity = '';
    /**
     * DKIM passphrase.
     * Used if your key is encrypted.
     *
     * @var string
     */
    public $DKIM_passphrase = '';
    /**
     * DKIM signing domain name.
     *
     * @example 'example.com'
     *
     * @var string
     */
    public $DKIM_domain = '';
    /**
     * DKIM Copy header field values for diagnostic use.
     *
     * @var bool
     */
    public $DKIM_copyHeaderFields = true;
    /**
     * DKIM Extra signing headers.
     *
     * @example ['List-Unsubscribe', 'List-Help']
     *
     * @var array
     */
    public $DKIM_extraHeaders = [];
    /**
     * DKIM private key file path.
     *
     * @var string
     */
    public $DKIM_private = '';
    /**
     * DKIM private key string.
     *
     * If set, takes precedence over `$DKIM_private`.
     *
     * @var string
     */
    public $DKIM_private_string = '';
    /**
     * Callback Action function name.
     *
     * The function that handles the result of the send email action.
     * It is called out by send() for each email sent.
     *
     * Value can be any php callable: http://www.php.net/is_callable
     *
     * Parameters:
     *   bool $result        result of the send action
     *   array   $to            email addresses of the recipients
     *   array   $cc            cc email addresses
     *   array   $bcc           bcc email addresses
     *   string  $subject       the subject
     *   string  $body          the email body
     *   string  $from          email address of sender
     *   string  $extra         extra information of possible use
     *                          "smtp_transaction_id' => last smtp transaction id
     *
     * @var string
     */
    public $action_function = '';
    /**
     * What to put in the X-Mailer header.
     * Options: An empty string for PHPMailer default, whitespace for none, or a string to use.
     *
     * @var string
     */
    public $XMailer = '';
    /**
     * Which validator to use by default when validating email addresses.
     * May be a callable to inject your own validator, but there are several built-in validators.
     * The default validator uses PHP's FILTER_VALIDATE_EMAIL filter_var option.
     *
     * @see PHPMailer::validateAddress()
     *
     * @var string|callable
     */
    public static $validator = 'php';
    /**
     * An instance of the SMTP sender class.
     *
     * @var SMTP
     */
    protected $smtp;
    /**
     * The array of 'to' names and addresses.
     *
     * @var array
     */
    protected $to = [];
    /**
     * The array of 'cc' names and addresses.
     *
     * @var array
     */
    protected $cc = [];
    /**
     * The array of 'bcc' names and addresses.
     *
     * @var array
     */
    protected $bcc = [];
    /**
     * The array of reply-to names and addresses.
     *
     * @var array
     */
    protected $ReplyTo = [];
    /**
     * An array of all kinds of addresses.
     * Includes all of $to, $cc, $bcc.
     *
     * @see PHPMailer::$to
     * @see PHPMailer::$cc
     * @see PHPMailer::$bcc
     *
     * @var array
     */
    protected $all_recipients = [];
    /**
     * An array of names and addresses queued for validation.
     * In send(), valid and non duplicate entries are moved to $all_recipients
     * and one of $to, $cc, or $bcc.
     * This array is used only for addresses with IDN.
     *
     * @see PHPMailer::$to
     * @see PHPMailer::$cc
     * @see PHPMailer::$bcc
     * @see PHPMailer::$all_recipients
     *
     * @var array
     */
    protected $RecipientsQueue = [];
    /**
     * An array of reply-to names and addresses queued for validation.
     * In send(), valid and non duplicate entries are moved to $ReplyTo.
     * This array is used only for addresses with IDN.
     *
     * @see PHPMailer::$ReplyTo
     *
     * @var array
     */
    protected $ReplyToQueue = [];
    /**
     * The array of attachments.
     *
     * @var array
     */
    protected $attachment = [];
    /**
     * The array of custom headers.
     *
     * @var array
     */
    protected $CustomHeader = [];
    /**
     * The most recent Message-ID (including angular brackets).
     *
     * @var string
     */
    protected $lastMessageID = '';
    /**
     * The message's MIME type.
     *
     * @var string
     */
    protected $message_type = '';
    /**
     * The array of MIME boundary strings.
     *
     * @var array
     */
    protected $boundary = [];
    /**
     * The array of available languages.
     *
     * @var array
     */
    protected $language = [];
    /**
     * The number of errors encountered.
     *
     * @var int
     */
    protected $error_count = 0;
    /**
     * The S/MIME certificate file path.
     *
     * @var string
     */
    protected $sign_cert_file = '';
    /**
     * The S/MIME key file path.
     *
     * @var string
     */
    protected $sign_key_file = '';
    /**
     * The optional S/MIME extra certificates ("CA Chain") file path.
     *
     * @var string
     */
    protected $sign_extracerts_file = '';
    /**
     * The S/MIME password for the key.
     * Used only if the key is encrypted.
     *
     * @var string
     */
    protected $sign_key_pass = '';
    /**
     * Whether to throw exceptions for errors.
     *
     * @var bool
     */
    protected $exceptions = false;
    /**
     * Unique ID used for message ID and boundaries.
     *
     * @var string
     */
    protected $uniqueid = '';
    /**
     * The PHPMailer Version number.
     *
     * @var string
     */
    const VERSION = '6.0.7';
    /**
     * Error severity: message only, continue processing.
     *
     * @var int
     */
    const STOP_MESSAGE = 0;
    /**
     * Error severity: message, likely ok to continue processing.
     *
     * @var int
     */
    const STOP_CONTINUE = 1;
    /**
     * Error severity: message, plus full stop, critical error reached.
     *
     * @var int
     */
    const STOP_CRITICAL = 2;
    /**
     * SMTP RFC standard line ending.
     *
     * @var string
     */
    protected static $LE = "\r\n";
    /**
     * The maximum line length allowed by RFC 2822 section 2.1.1.
     *
     * @var int
     */
    const MAX_LINE_LENGTH = 998;
    /**
     * The lower maximum line length allowed by RFC 2822 section 2.1.1.
     * This length does NOT include the line break
     * 76 means that lines will be 77 or 78 chars depending on whether
     * the line break format is LF or CRLF; both are valid.
     *
     * @var int
     */
    const STD_LINE_LENGTH = 76;
    /**
     * Constructor.
     *
     * @param bool $exceptions Should we throw external exceptions?
     */
    public function __construct($exceptions = null)
    {
        if (null !== $exceptions) {
            $this->exceptions = (bool) $exceptions;
        }
        //Pick an appropriate debug output format automatically
        $this->Debugoutput = (strpos(PHP_SAPI, 'cli') !== false ? 'echo' : 'html');
    }
    /**
     * Destructor.
     */
    public function __destruct()
    {
        //Close any open SMTP connection nicely
        $this->smtpClose();
    }
    /**
     * Call mail() in a safe_mode-aware fashion.
     * Also, unless sendmail_path points to sendmail (or something that
     * claims to be sendmail), don't pass params (not a perfect fix,
     * but it will do).
     *
     * @param string      $to      To
     * @param string      $subject Subject
     * @param string      $body    Message Body
     * @param string      $header  Additional Header(s)
     * @param string|null $params  Params
     *
     * @return bool
     */
    private function mailPassthru($to, $subject, $body, $header, $params)
    {
        //Check overloading of mail function to avoid double-encoding
        if (ini_get('mbstring.func_overload') & 1) {
            $subject = $this->secureHeader($subject);
        } else {
            $subject = $this->encodeHeader($this->secureHeader($subject));
        }
        //Calling mail() with null params breaks
        if (!$this->UseSendmailOptions or null === $params) {
            $result = @mail($to, $subject, $body, $header);
        } else {
            $result = @mail($to, $subject, $body, $header, $params);
        }
        return $result;
    }
    /**
     * Output debugging info via user-defined method.
     * Only generates output if SMTP debug output is enabled (@see SMTP::$do_debug).
     *
     * @see PHPMailer::$Debugoutput
     * @see PHPMailer::$SMTPDebug
     *
     * @param string $str
     */
    protected function edebug($str)
    {
        if ($this->SMTPDebug <= 0) {
            return;
        }
        //Is this a PSR-3 logger?
        if ($this->Debugoutput instanceof \Psr\Log\LoggerInterface) {
            $this->Debugoutput->debug($str);
            return;
        }
        //Avoid clash with built-in function names
        if (!in_array($this->Debugoutput, ['error_log', 'html', 'echo']) and is_callable($this->Debugoutput)) {
            call_user_func($this->Debugoutput, $str, $this->SMTPDebug);
            return;
        }
        switch ($this->Debugoutput) {
            case 'error_log':
                //Don't output, just log
                error_log($str);
                break;
            case 'html':
                //Cleans up output a bit for a better looking, HTML-safe output
                echo htmlentities(
                    preg_replace('/[\r\n]+/', '', $str),
                    ENT_QUOTES,
                    'UTF-8'
                ), "<br>\n";
                break;
            case 'echo':
            default:
                //Normalize line breaks
                $str = preg_replace('/\r\n|\r/ms', "\n", $str);
                echo gmdate('Y-m-d H:i:s'),
                "\t",
                    //Trim trailing space
                trim(
                //Indent for readability, except for trailing break
                    str_replace(
                        "\n",
                        "\n                   \t                  ",
                        trim($str)
                    )
                ),
                "\n";
        }
    }
    /**
     * Sets message type to HTML or plain.
     *
     * @param bool $isHtml True for HTML mode
     */
    public function isHTML($isHtml = true)
    {
        if ($isHtml) {
            $this->ContentType = static::CONTENT_TYPE_TEXT_HTML;
        } else {
            $this->ContentType = static::CONTENT_TYPE_PLAINTEXT;
        }
    }
    /**
     * Send messages using SMTP.
     */
    public function isSMTP()
    {
        $this->Mailer = 'smtp';
    }
    /**
     * Send messages using PHP's mail() function.
     */
    public function isMail()
    {
        $this->Mailer = 'mail';
    }
    /**
     * Send messages using $Sendmail.
     */
    public function isSendmail()
    {
        $ini_sendmail_path = ini_get('sendmail_path');
        if (false === stripos($ini_sendmail_path, 'sendmail')) {
            $this->Sendmail = '/usr/sbin/sendmail';
        } else {
            $this->Sendmail = $ini_sendmail_path;
        }
        $this->Mailer = 'sendmail';
    }
    /**
     * Send messages using qmail.
     */
    public function isQmail()
    {
        $ini_sendmail_path = ini_get('sendmail_path');
        if (false === stripos($ini_sendmail_path, 'qmail')) {
            $this->Sendmail = '/var/qmail/bin/qmail-inject';
        } else {
            $this->Sendmail = $ini_sendmail_path;
        }
        $this->Mailer = 'qmail';
    }
    /**
     * Add a "To" address.
     *
     * @param string $address The email address to send to
     * @param string $name
     *
     * @throws Exception
     *
     * @return bool true on success, false if address already used or invalid in some way
     */
    public function addAddress($address, $name = '')
    {
        return $this->addOrEnqueueAnAddress('to', $address, $name);
    }
    /**
     * Add a "CC" address.
     *
     * @param string $address The email address to send to
     * @param string $name
     *
     * @throws Exception
     *
     * @return bool true on success, false if address already used or invalid in some way
     */
    public function addCC($address, $name = '')
    {
        return $this->addOrEnqueueAnAddress('cc', $address, $name);
    }
    /**
     * Add a "BCC" address.
     *
     * @param string $address The email address to send to
     * @param string $name
     *
     * @throws Exception
     *
     * @return bool true on success, false if address already used or invalid in some way
     */
    public function addBCC($address, $name = '')
    {
        return $this->addOrEnqueueAnAddress('bcc', $address, $name);
    }
    /**
     * Add a "Reply-To" address.
     *
     * @param string $address The email address to reply to
     * @param string $name
     *
     * @throws Exception
     *
     * @return bool true on success, false if address already used or invalid in some way
     */
    public function addReplyTo($address, $name = '')
    {
        return $this->addOrEnqueueAnAddress('Reply-To', $address, $name);
    }
    /**
     * Add an address to one of the recipient arrays or to the ReplyTo array. Because PHPMailer
     * can't validate addresses with an IDN without knowing the PHPMailer::$CharSet (that can still
     * be modified after calling this function), addition of such addresses is delayed until send().
     * Addresses that have been added already return false, but do not throw exceptions.
     *
     * @param string $kind    One of 'to', 'cc', 'bcc', or 'ReplyTo'
     * @param string $address The email address to send, resp. to reply to
     * @param string $name
     *
     * @throws Exception
     *
     * @return bool true on success, false if address already used or invalid in some way
     */
    protected function addOrEnqueueAnAddress($kind, $address, $name)
    {
        $address = trim($address);
        $name = trim(preg_replace('/[\r\n]+/', '', $name)); //Strip breaks and trim
        $pos = strrpos($address, '@');
        if (false === $pos) {
            // At-sign is missing.
            $error_message = sprintf('%s (%s): %s',
                $this->lang('invalid_address'),
                $kind,
                $address);
            $this->setError($error_message);
            $this->edebug($error_message);
            if ($this->exceptions) {
                throw new Exception($error_message);
            }
            return false;
        }
        $params = [$kind, $address, $name];
        // Enqueue addresses with IDN until we know the PHPMailer::$CharSet.
        if ($this->has8bitChars(substr($address, ++$pos)) and static::idnSupported()) {
            if ('Reply-To' != $kind) {
                if (!array_key_exists($address, $this->RecipientsQueue)) {
                    $this->RecipientsQueue[$address] = $params;
                    return true;
                }
            } else {
                if (!array_key_exists($address, $this->ReplyToQueue)) {
                    $this->ReplyToQueue[$address] = $params;
                    return true;
                }
            }
            return false;
        }
        // Immediately add standard addresses without IDN.
        return call_user_func_array([$this, 'addAnAddress'], $params);
    }
    /**
     * Add an address to one of the recipient arrays or to the ReplyTo array.
     * Addresses that have been added already return false, but do not throw exceptions.
     *
     * @param string $kind    One of 'to', 'cc', 'bcc', or 'ReplyTo'
     * @param string $address The email address to send, resp. to reply to
     * @param string $name
     *
     * @throws Exception
     *
     * @return bool true on success, false if address already used or invalid in some way
     */
    protected function addAnAddress($kind, $address, $name = '')
    {
        if (!in_array($kind, ['to', 'cc', 'bcc', 'Reply-To'])) {
            $error_message = sprintf('%s: %s',
                $this->lang('Invalid recipient kind'),
                $kind);
            $this->setError($error_message);
            $this->edebug($error_message);
            if ($this->exceptions) {
                throw new Exception($error_message);
            }
            return false;
        }
        if (!static::validateAddress($address)) {
            $error_message = sprintf('%s (%s): %s',
                $this->lang('invalid_address'),
                $kind,
                $address);
            $this->setError($error_message);
            $this->edebug($error_message);
            if ($this->exceptions) {
                throw new Exception($error_message);
            }
            return false;
        }
        if ('Reply-To' != $kind) {
            if (!array_key_exists(strtolower($address), $this->all_recipients)) {
                $this->{$kind}[] = [$address, $name];
                $this->all_recipients[strtolower($address)] = true;
                return true;
            }
        } else {
            if (!array_key_exists(strtolower($address), $this->ReplyTo)) {
                $this->ReplyTo[strtolower($address)] = [$address, $name];
                return true;
            }
        }
        return false;
    }
    /**
     * Parse and validate a string containing one or more RFC822-style comma-separated email addresses
     * of the form "display name <address>" into an array of name/address pairs.
     * Uses the imap_rfc822_parse_adrlist function if the IMAP extension is available.
     * Note that quotes in the name part are removed.
     *
     * @see    http://www.andrew.cmu.edu/user/agreen1/testing/mrbs/web/Mail/RFC822.php A more careful implementation
     *
     * @param string $addrstr The address list string
     * @param bool   $useimap Whether to use the IMAP extension to parse the list
     *
     * @return array
     */
    public static function parseAddresses($addrstr, $useimap = true)
    {
        $addresses = [];
        if ($useimap and function_exists('imap_rfc822_parse_adrlist')) {
            //Use this built-in parser if it's available
            $list = imap_rfc822_parse_adrlist($addrstr, '');
            foreach ($list as $address) {
                if ('.SYNTAX-ERROR.' != $address->host) {
                    if (static::validateAddress($address->mailbox . '@' . $address->host)) {
                        $addresses[] = [
                            'name' => (property_exists($address, 'personal') ? $address->personal : ''),
                            'address' => $address->mailbox . '@' . $address->host,
                        ];
                    }
                }
            }
        } else {
            //Use this simpler parser
            $list = explode(',', $addrstr);
            foreach ($list as $address) {
                $address = trim($address);
                //Is there a separate name part?
                if (strpos($address, '<') === false) {
                    //No separate name, just use the whole thing
                    if (static::validateAddress($address)) {
                        $addresses[] = [
                            'name' => '',
                            'address' => $address,
                        ];
                    }
                } else {
                    list($name, $email) = explode('<', $address);
                    $email = trim(str_replace('>', '', $email));
                    if (static::validateAddress($email)) {
                        $addresses[] = [
                            'name' => trim(str_replace(['"', "'"], '', $name)),
                            'address' => $email,
                        ];
                    }
                }
            }
        }
        return $addresses;
    }
    /**
     * Set the From and FromName properties.
     *
     * @param string $address
     * @param string $name
     * @param bool   $auto    Whether to also set the Sender address, defaults to true
     *
     * @throws Exception
     *
     * @return bool
     */
    public function setFrom($address, $name = '', $auto = true)
    {
        $address = trim($address);
        $name = trim(preg_replace('/[\r\n]+/', '', $name)); //Strip breaks and trim
        // Don't validate now addresses with IDN. Will be done in send().
        $pos = strrpos($address, '@');
        if (false === $pos or
            (!$this->has8bitChars(substr($address, ++$pos)) or !static::idnSupported()) and
            !static::validateAddress($address)) {
            $error_message = sprintf('%s (From): %s',
                $this->lang('invalid_address'),
                $address);
            $this->setError($error_message);
            $this->edebug($error_message);
            if ($this->exceptions) {
                throw new Exception($error_message);
            }
            return false;
        }
        $this->From = $address;
        $this->FromName = $name;
        if ($auto) {
            if (empty($this->Sender)) {
                $this->Sender = $address;
            }
        }
        return true;
    }
    /**
     * Return the Message-ID header of the last email.
     * Technically this is the value from the last time the headers were created,
     * but it's also the message ID of the last sent message except in
     * pathological cases.
     *
     * @return string
     */
    public function getLastMessageID()
    {
        return $this->lastMessageID;
    }
    /**
     * Check that a string looks like an email address.
     * Validation patterns supported:
     * * `auto` Pick best pattern automatically;
     * * `pcre8` Use the squiloople.com pattern, requires PCRE > 8.0;
     * * `pcre` Use old PCRE implementation;
     * * `php` Use PHP built-in FILTER_VALIDATE_EMAIL;
     * * `html5` Use the pattern given by the HTML5 spec for 'email' type form input elements.
     * * `noregex` Don't use a regex: super fast, really dumb.
     * Alternatively you may pass in a callable to inject your own validator, for example:
     *
     * ```php
     * PHPMailer::validateAddress('user@example.com', function($address) {
     *     return (strpos($address, '@') !== false);
     * });
     * ```
     *
     * You can also set the PHPMailer::$validator static to a callable, allowing built-in methods to use your validator.
     *
     * @param string          $address       The email address to check
     * @param string|callable $patternselect Which pattern to use
     *
     * @return bool
     */
    public static function validateAddress($address, $patternselect = null)
    {
        if (null === $patternselect) {
            $patternselect = static::$validator;
        }
        if (is_callable($patternselect)) {
            return call_user_func($patternselect, $address);
        }
        //Reject line breaks in addresses; it's valid RFC5322, but not RFC5321
        if (strpos($address, "\n") !== false or strpos($address, "\r") !== false) {
            return false;
        }
        switch ($patternselect) {
            case 'pcre': //Kept for BC
            case 'pcre8':
                /*
                 * A more complex and more permissive version of the RFC5322 regex on which FILTER_VALIDATE_EMAIL
                 * is based.
                 * In addition to the addresses allowed by filter_var, also permits:
                 *  * dotless domains: `a@b`
                 *  * comments: `1234 @ local(blah) .machine .example`
                 *  * quoted elements: `'"test blah"@example.org'`
                 *  * numeric TLDs: `a@b.123`
                 *  * unbracketed IPv4 literals: `a@192.168.0.1`
                 *  * IPv6 literals: 'first.last@[IPv6:a1::]'
                 * Not all of these will necessarily work for sending!
                 *
                 * @see       http://squiloople.com/2009/12/20/email-address-validation/
                 * @copyright 2009-2010 Michael Rushton
                 * Feel free to use and redistribute this code. But please keep this copyright notice.
                 */
                return (bool) preg_match(
                    '/^(?!(?>(?1)"?(?>\\\[ -~]|[^"])"?(?1)){255,})(?!(?>(?1)"?(?>\\\[ -~]|[^"])"?(?1)){65,}@)' .
                    '((?>(?>(?>((?>(?>(?>\x0D\x0A)?[\t ])+|(?>[\t ]*\x0D\x0A)?[\t ]+)?)($(?>(?2)' .
                    '(?>[\x01-\x08\x0B\x0C\x0E-\'*-\[\]-\x7F]|\\\[\x00-\x7F]|(?3)))*(?2)$))+(?2))|(?2))?)' .
                    '([!#-\'*+\/-9=?^-~-]+|"(?>(?2)(?>[\x01-\x08\x0B\x0C\x0E-!#-\[\]-\x7F]|\\\[\x00-\x7F]))*' .
                    '(?2)")(?>(?1)\.(?1)(?4))*(?1)@(?!(?1)[a-z0-9-]{64,})(?1)(?>([a-z0-9](?>[a-z0-9-]*[a-z0-9])?)' .
                    '(?>(?1)\.(?!(?1)[a-z0-9-]{64,})(?1)(?5)){0,126}|\[(?:(?>IPv6:(?>([a-f0-9]{1,4})(?>:(?6)){7}' .
                    '|(?!(?:.*[a-f0-9][:\]]){8,})((?6)(?>:(?6)){0,6})?::(?7)?))|(?>(?>IPv6:(?>(?6)(?>:(?6)){5}:' .
                    '|(?!(?:.*[a-f0-9]:){6,})(?8)?::(?>((?6)(?>:(?6)){0,4}):)?))?(25[0-5]|2[0-4][0-9]|1[0-9]{2}' .
                    '|[1-9]?[0-9])(?>\.(?9)){3}))\])(?1)$/isD',
                    $address
                );
            case 'html5':
                /*
                 * This is the pattern used in the HTML5 spec for validation of 'email' type form input elements.
                 *
                 * @see http://www.whatwg.org/specs/web-apps/current-work/#e-mail-state-(type=email)
                 */
                return (bool) preg_match(
                    '/^[a-zA-Z0-9.!#$%&\'*+\/=?^_`{|}~-]+@[a-zA-Z0-9](?:[a-zA-Z0-9-]{0,61}' .
                    '[a-zA-Z0-9])?(?:\.[a-zA-Z0-9](?:[a-zA-Z0-9-]{0,61}[a-zA-Z0-9])?)*$/sD',
                    $address
                );
            case 'php':
            default:
                return (bool) filter_var($address, FILTER_VALIDATE_EMAIL);
        }
    }
    /**
     * Tells whether IDNs (Internationalized Domain Names) are supported or not. This requires the
     * `intl` and `mbstring` PHP extensions.
     *
     * @return bool `true` if required functions for IDN support are present
     */
    public static function idnSupported()
    {
        return function_exists('idn_to_ascii') and function_exists('mb_convert_encoding');
    }
    /**
     * Converts IDN in given email address to its ASCII form, also known as punycode, if possible.
     * Important: Address must be passed in same encoding as currently set in PHPMailer::$CharSet.
     * This function silently returns unmodified address if:
     * - No conversion is necessary (i.e. domain name is not an IDN, or is already in ASCII form)
     * - Conversion to punycode is impossible (e.g. required PHP functions are not available)
     *   or fails for any reason (e.g. domain contains characters not allowed in an IDN).
     *
     * @see    PHPMailer::$CharSet
     *
     * @param string $address The email address to convert
     *
     * @return string The encoded address in ASCII form
     */
    public function punyencodeAddress($address)
    {
        // Verify we have required functions, CharSet, and at-sign.
        $pos = strrpos($address, '@');
        if (static::idnSupported() and
            !empty($this->CharSet) and
            false !== $pos
        ) {
            $domain = substr($address, ++$pos);
            // Verify CharSet string is a valid one, and domain properly encoded in this CharSet.
            if ($this->has8bitChars($domain) and @mb_check_encoding($domain, $this->CharSet)) {
                $domain = mb_convert_encoding($domain, 'UTF-8', $this->CharSet);
                //Ignore IDE complaints about this line - method signature changed in PHP 5.4
                $errorcode = 0;
                $punycode = idn_to_ascii($domain, $errorcode, INTL_IDNA_VARIANT_UTS46);
                if (false !== $punycode) {
                    return substr($address, 0, $pos) . $punycode;
                }
            }
        }
        return $address;
    }
    /**
     * Create a message and send it.
     * Uses the sending method specified by $Mailer.
     *
     * @throws Exception
     *
     * @return bool false on error - See the ErrorInfo property for details of the error
     */
    public function send()
    {
        try {
            if (!$this->preSend()) {
                return false;
            }
            return $this->postSend();
        } catch (Exception $exc) {
            $this->mailHeader = '';
            $this->setError($exc->getMessage());
            if ($this->exceptions) {
                throw $exc;
            }
            return false;
        }
    }
    /**
     * Prepare a message for sending.
     *
     * @throws Exception
     *
     * @return bool
     */
    public function preSend()
    {
        if ('smtp' == $this->Mailer or
            ('mail' == $this->Mailer and stripos(PHP_OS, 'WIN') === 0)
        ) {
            //SMTP mandates RFC-compliant line endings
            //and it's also used with mail() on Windows
            static::setLE("\r\n");
        } else {
            //Maintain backward compatibility with legacy Linux command line mailers
            static::setLE(PHP_EOL);
        }
        //Check for buggy PHP versions that add a header with an incorrect line break
        if (ini_get('mail.add_x_header') == 1
            and 'mail' == $this->Mailer
            and stripos(PHP_OS, 'WIN') === 0
            and ((version_compare(PHP_VERSION, '7.0.0', '>=')
                    and version_compare(PHP_VERSION, '7.0.17', '<'))
                or (version_compare(PHP_VERSION, '7.1.0', '>=')
                    and version_compare(PHP_VERSION, '7.1.3', '<')))
        ) {
            trigger_error(
                'Your version of PHP is affected by a bug that may result in corrupted messages.' .
                ' To fix it, switch to sending using SMTP, disable the mail.add_x_header option in' .
                ' your php.ini, switch to MacOS or Linux, or upgrade your PHP to version 7.0.17+ or 7.1.3+.',
                E_USER_WARNING
            );
        }
        try {
            $this->error_count = 0; // Reset errors
            $this->mailHeader = '';
            // Dequeue recipient and Reply-To addresses with IDN
            foreach (array_merge($this->RecipientsQueue, $this->ReplyToQueue) as $params) {
                $params[1] = $this->punyencodeAddress($params[1]);
                call_user_func_array([$this, 'addAnAddress'], $params);
            }
            if (count($this->to) + count($this->cc) + count($this->bcc) < 1) {
                throw new Exception($this->lang('provide_address'), self::STOP_CRITICAL);
            }
            // Validate From, Sender, and ConfirmReadingTo addresses
            foreach (['From', 'Sender', 'ConfirmReadingTo'] as $address_kind) {
                $this->$address_kind = trim($this->$address_kind);
                if (empty($this->$address_kind)) {
                    continue;
                }
                $this->$address_kind = $this->punyencodeAddress($this->$address_kind);
                if (!static::validateAddress($this->$address_kind)) {
                    $error_message = sprintf('%s (%s): %s',
                        $this->lang('invalid_address'),
                        $address_kind,
                        $this->$address_kind);
                    $this->setError($error_message);
                    $this->edebug($error_message);
                    if ($this->exceptions) {
                        throw new Exception($error_message);
                    }
                    return false;
                }
            }
            // Set whether the message is multipart/alternative
            if ($this->alternativeExists()) {
                $this->ContentType = static::CONTENT_TYPE_MULTIPART_ALTERNATIVE;
            }
            $this->setMessageType();
            // Refuse to send an empty message unless we are specifically allowing it
            if (!$this->AllowEmpty and empty($this->Body)) {
                throw new Exception($this->lang('empty_message'), self::STOP_CRITICAL);
            }
            //Trim subject consistently
            $this->Subject = trim($this->Subject);
            // Create body before headers in case body makes changes to headers (e.g. altering transfer encoding)
            $this->MIMEHeader = '';
            $this->MIMEBody = $this->createBody();
            // createBody may have added some headers, so retain them
            $tempheaders = $this->MIMEHeader;
            $this->MIMEHeader = $this->createHeader();
            $this->MIMEHeader .= $tempheaders;
            // To capture the complete message when using mail(), create
            // an extra header list which createHeader() doesn't fold in
            if ('mail' == $this->Mailer) {
                if (count($this->to) > 0) {
                    $this->mailHeader .= $this->addrAppend('To', $this->to);
                } else {
                    $this->mailHeader .= $this->headerLine('To', 'undisclosed-recipients:;');
                }
                $this->mailHeader .= $this->headerLine(
                    'Subject',
                    $this->encodeHeader($this->secureHeader($this->Subject))
                );
            }
            // Sign with DKIM if enabled
            if (!empty($this->DKIM_domain)
                and !empty($this->DKIM_selector)
                and (!empty($this->DKIM_private_string)
                    or (!empty($this->DKIM_private)
                        and static::isPermittedPath($this->DKIM_private)
                        and file_exists($this->DKIM_private)
                    )
                )
            ) {
                $header_dkim = $this->DKIM_Add(
                    $this->MIMEHeader . $this->mailHeader,
                    $this->encodeHeader($this->secureHeader($this->Subject)),
                    $this->MIMEBody
                );
                $this->MIMEHeader = rtrim($this->MIMEHeader, "\r\n ") . static::$LE .
                    static::normalizeBreaks($header_dkim) . static::$LE;
            }
            return true;
        } catch (Exception $exc) {
            $this->setError($exc->getMessage());
            if ($this->exceptions) {
                throw $exc;
            }
            return false;
        }
    }
    /**
     * Actually send a message via the selected mechanism.
     *
     * @throws Exception
     *
     * @return bool
     */
    public function postSend()
    {
        try {
            // Choose the mailer and send through it
            switch ($this->Mailer) {
                case 'sendmail':
                case 'qmail':
                    return $this->sendmailSend($this->MIMEHeader, $this->MIMEBody);
                case 'smtp':
                    return $this->smtpSend($this->MIMEHeader, $this->MIMEBody);
                case 'mail':
                    return $this->mailSend($this->MIMEHeader, $this->MIMEBody);
                default:
                    $sendMethod = $this->Mailer . 'Send';
                    if (method_exists($this, $sendMethod)) {
                        return $this->$sendMethod($this->MIMEHeader, $this->MIMEBody);
                    }
                    return $this->mailSend($this->MIMEHeader, $this->MIMEBody);
            }
        } catch (Exception $exc) {
            $this->setError($exc->getMessage());
            $this->edebug($exc->getMessage());
            if ($this->exceptions) {
                throw $exc;
            }
        }
        return false;
    }
    /**
     * Send mail using the $Sendmail program.
     *
     * @see    PHPMailer::$Sendmail
     *
     * @param string $header The message headers
     * @param string $body   The message body
     *
     * @throws Exception
     *
     * @return bool
     */
    protected function sendmailSend($header, $body)
    {
        // CVE-2016-10033, CVE-2016-10045: Don't pass -f if characters will be escaped.
        if (!empty($this->Sender) and self::isShellSafe($this->Sender)) {
            if ('qmail' == $this->Mailer) {
                $sendmailFmt = '%s -f%s';
            } else {
                $sendmailFmt = '%s -oi -f%s -t';
            }
        } else {
            if ('qmail' == $this->Mailer) {
                $sendmailFmt = '%s';
            } else {
                $sendmailFmt = '%s -oi -t';
            }
        }
        $sendmail = sprintf($sendmailFmt, escapeshellcmd($this->Sendmail), $this->Sender);
        if ($this->SingleTo) {
            foreach ($this->SingleToArray as $toAddr) {
                $mail = @popen($sendmail, 'w');
                if (!$mail) {
                    throw new Exception($this->lang('execute') . $this->Sendmail, self::STOP_CRITICAL);
                }
                fwrite($mail, 'To: ' . $toAddr . "\n");
                fwrite($mail, $header);
                fwrite($mail, $body);
                $result = pclose($mail);
                $this->doCallback(
                    ($result == 0),
                    [$toAddr],
                    $this->cc,
                    $this->bcc,
                    $this->Subject,
                    $body,
                    $this->From,
                    []
                );
                if (0 !== $result) {
                    throw new Exception($this->lang('execute') . $this->Sendmail, self::STOP_CRITICAL);
                }
            }
        } else {
            $mail = @popen($sendmail, 'w');
            if (!$mail) {
                throw new Exception($this->lang('execute') . $this->Sendmail, self::STOP_CRITICAL);
            }
            fwrite($mail, $header);
            fwrite($mail, $body);
            $result = pclose($mail);
            $this->doCallback(
                ($result == 0),
                $this->to,
                $this->cc,
                $this->bcc,
                $this->Subject,
                $body,
                $this->From,
                []
            );
            if (0 !== $result) {
                throw new Exception($this->lang('execute') . $this->Sendmail, self::STOP_CRITICAL);
            }
        }
        return true;
    }
    /**
     * Fix CVE-2016-10033 and CVE-2016-10045 by disallowing potentially unsafe shell characters.
     * Note that escapeshellarg and escapeshellcmd are inadequate for our purposes, especially on Windows.
     *
     * @see https://github.com/PHPMailer/PHPMailer/issues/924 CVE-2016-10045 bug report
     *
     * @param string $string The string to be validated
     *
     * @return bool
     */
    protected static function isShellSafe($string)
    {
        // Future-proof
        if (escapeshellcmd($string) !== $string
            or !in_array(escapeshellarg($string), ["'$string'", "\"$string\""])
        ) {
            return false;
        }
        $length = strlen($string);
        for ($i = 0; $i < $length; ++$i) {
            $c = $string[$i];
            // All other characters have a special meaning in at least one common shell, including = and +.
            // Full stop (.) has a special meaning in cmd.exe, but its impact should be negligible here.
            // Note that this does permit non-Latin alphanumeric characters based on the current locale.
            if (!ctype_alnum($c) && strpos('@_-.', $c) === false) {
                return false;
            }
        }
        return true;
    }
    /**
     * Check whether a file path is of a permitted type.
     * Used to reject URLs and phar files from functions that access local file paths,
     * such as addAttachment.
     *
     * @param string $path A relative or absolute path to a file
     *
     * @return bool
     */
    protected static function isPermittedPath($path)
    {
        return !preg_match('#^[a-z]+://#i', $path);
    }
    /**
     * Send mail using the PHP mail() function.
     *
     * @see    http://www.php.net/manual/en/book.mail.php
     *
     * @param string $header The message headers
     * @param string $body   The message body
     *
     * @throws Exception
     *
     * @return bool
     */
    protected function mailSend($header, $body)
    {
        $toArr = [];
        foreach ($this->to as $toaddr) {
            $toArr[] = $this->addrFormat($toaddr);
        }
        $to = implode(', ', $toArr);
        $params = null;
        //This sets the SMTP envelope sender which gets turned into a return-path header by the receiver
        if (!empty($this->Sender) and static::validateAddress($this->Sender)) {
            //A space after `-f` is optional, but there is a long history of its presence
            //causing problems, so we don't use one
            //Exim docs: http://www.exim.org/exim-html-current/doc/html/spec_html/ch-the_exim_command_line.html
            //Sendmail docs: http://www.sendmail.org/~ca/email/man/sendmail.html
            //Qmail docs: http://www.qmail.org/man/man8/qmail-inject.html
            //Example problem: https://www.drupal.org/node/1057954
            // CVE-2016-10033, CVE-2016-10045: Don't pass -f if characters will be escaped.
            if (self::isShellSafe($this->Sender)) {
                $params = sprintf('-f%s', $this->Sender);
            }
        }
        if (!empty($this->Sender) and static::validateAddress($this->Sender)) {
            $old_from = ini_get('sendmail_from');
            ini_set('sendmail_from', $this->Sender);
        }
        $result = false;
        if ($this->SingleTo and count($toArr) > 1) {
            foreach ($toArr as $toAddr) {
                $result = $this->mailPassthru($toAddr, $this->Subject, $body, $header, $params);
                $this->doCallback($result, [$toAddr], $this->cc, $this->bcc, $this->Subject, $body, $this->From, []);
            }
        } else {
            $result = $this->mailPassthru($to, $this->Subject, $body, $header, $params);
            $this->doCallback($result, $this->to, $this->cc, $this->bcc, $this->Subject, $body, $this->From, []);
        }
        if (isset($old_from)) {
            ini_set('sendmail_from', $old_from);
        }
        if (!$result) {
            throw new Exception($this->lang('instantiate'), self::STOP_CRITICAL);
        }
        return true;
    }
    /**
     * Get an instance to use for SMTP operations.
     * Override this function to load your own SMTP implementation,
     * or set one with setSMTPInstance.
     *
     * @return SMTP
     */
    public function getSMTPInstance()
    {
        if (!is_object($this->smtp)) {
            $this->smtp = new SMTP();
        }
        return $this->smtp;
    }
    /**
     * Provide an instance to use for SMTP operations.
     *
     * @param SMTP $smtp
     *
     * @return SMTP
     */
    public function setSMTPInstance(SMTP $smtp)
    {
        $this->smtp = $smtp;
        return $this->smtp;
    }
    /**
     * Send mail via SMTP.
     * Returns false if there is a bad MAIL FROM, RCPT, or DATA input.
     *
     * @see PHPMailer::setSMTPInstance() to use a different class.
     *
     * @uses \PHPMailer\PHPMailer\SMTP
     *
     * @param string $header The message headers
     * @param string $body   The message body
     *
     * @throws Exception
     *
     * @return bool
     */
    protected function smtpSend($header, $body)
    {
        $bad_rcpt = [];
        if (!$this->smtpConnect($this->SMTPOptions)) {
            throw new Exception($this->lang('smtp_connect_failed'), self::STOP_CRITICAL);
        }
        //Sender already validated in preSend()
        if ('' == $this->Sender) {
            $smtp_from = $this->From;
        } else {
            $smtp_from = $this->Sender;
        }
        if (!$this->smtp->mail($smtp_from)) {
            $this->setError($this->lang('from_failed') . $smtp_from . ' : ' . implode(',', $this->smtp->getError()));
            throw new Exception($this->ErrorInfo, self::STOP_CRITICAL);
        }
        $callbacks = [];
        // Attempt to send to all recipients
        foreach ([$this->to, $this->cc, $this->bcc] as $togroup) {
            foreach ($togroup as $to) {
                if (!$this->smtp->recipient($to[0], $this->dsn)) {
                    $error = $this->smtp->getError();
                    $bad_rcpt[] = ['to' => $to[0], 'error' => $error['detail']];
                    $isSent = false;
                } else {
                    $isSent = true;
                }
                $callbacks[] = ['issent'=>$isSent, 'to'=>$to[0]];
            }
        }
        // Only send the DATA command if we have viable recipients
        if ((count($this->all_recipients) > count($bad_rcpt)) and !$this->smtp->data($header . $body)) {
            throw new Exception($this->lang('data_not_accepted'), self::STOP_CRITICAL);
        }
        $smtp_transaction_id = $this->smtp->getLastTransactionID();
        if ($this->SMTPKeepAlive) {
            $this->smtp->reset();
        } else {
            $this->smtp->quit();
            $this->smtp->close();
        }
        foreach ($callbacks as $cb) {
            $this->doCallback(
                $cb['issent'],
                [$cb['to']],
                [],
                [],
                $this->Subject,
                $body,
                $this->From,
                ['smtp_transaction_id' => $smtp_transaction_id]
            );
        }
        //Create error message for any bad addresses
        if (count($bad_rcpt) > 0) {
            $errstr = '';
            foreach ($bad_rcpt as $bad) {
                $errstr .= $bad['to'] . ': ' . $bad['error'];
            }
            throw new Exception(
                $this->lang('recipients_failed') . $errstr,
                self::STOP_CONTINUE
            );
        }
        return true;
    }
    /**
     * Initiate a connection to an SMTP server.
     * Returns false if the operation failed.
     *
     * @param array $options An array of options compatible with stream_context_create()
     *
     * @throws Exception
     *
     * @uses \PHPMailer\PHPMailer\SMTP
     *
     * @return bool
     */
    public function smtpConnect($options = null)
    {
        if (null === $this->smtp) {
            $this->smtp = $this->getSMTPInstance();
        }
        //If no options are provided, use whatever is set in the instance
        if (null === $options) {
            $options = $this->SMTPOptions;
        }
        // Already connected?
        if ($this->smtp->connected()) {
            return true;
        }
        $this->smtp->setTimeout($this->Timeout);
        $this->smtp->setDebugLevel($this->SMTPDebug);
        $this->smtp->setDebugOutput($this->Debugoutput);
        $this->smtp->setVerp($this->do_verp);
        $hosts = explode(';', $this->Host);
        $lastexception = null;
        foreach ($hosts as $hostentry) {
            $hostinfo = [];
            if (!preg_match(
                '/^((ssl|tls):\/\/)*([a-zA-Z0-9\.-]*|\[[a-fA-F0-9:]+\]):?([0-9]*)$/',
                trim($hostentry),
                $hostinfo
            )) {
                static::edebug($this->lang('connect_host') . ' ' . $hostentry);
                // Not a valid host entry
                continue;
            }
            // $hostinfo[2]: optional ssl or tls prefix
            // $hostinfo[3]: the hostname
            // $hostinfo[4]: optional port number
            // The host string prefix can temporarily override the current setting for SMTPSecure
            // If it's not specified, the default value is used
            //Check the host name is a valid name or IP address before trying to use it
            if (!static::isValidHost($hostinfo[3])) {
                static::edebug($this->lang('connect_host') . ' ' . $hostentry);
                continue;
            }
            $prefix = '';
            $secure = $this->SMTPSecure;
            $tls = ('tls' == $this->SMTPSecure);
            if ('ssl' == $hostinfo[2] or ('' == $hostinfo[2] and 'ssl' == $this->SMTPSecure)) {
                $prefix = 'ssl://';
                $tls = false; // Can't have SSL and TLS at the same time
                $secure = 'ssl';
            } elseif ('tls' == $hostinfo[2]) {
                $tls = true;
                // tls doesn't use a prefix
                $secure = 'tls';
            }
            //Do we need the OpenSSL extension?
            $sslext = defined('OPENSSL_ALGO_SHA256');
            if ('tls' === $secure or 'ssl' === $secure) {
                //Check for an OpenSSL constant rather than using extension_loaded, which is sometimes disabled
                if (!$sslext) {
                    throw new Exception($this->lang('extension_missing') . 'openssl', self::STOP_CRITICAL);
                }
            }
            $host = $hostinfo[3];
            $port = $this->Port;
            $tport = (int) $hostinfo[4];
            if ($tport > 0 and $tport < 65536) {
                $port = $tport;
            }
            if ($this->smtp->connect($prefix . $host, $port, $this->Timeout, $options)) {
                try {
                    if ($this->Helo) {
                        $hello = $this->Helo;
                    } else {
                        $hello = $this->serverHostname();
                    }
                    $this->smtp->hello($hello);
                    //Automatically enable TLS encryption if:
                    // * it's not disabled
                    // * we have openssl extension
                    // * we are not already using SSL
                    // * the server offers STARTTLS
                    if ($this->SMTPAutoTLS and $sslext and 'ssl' != $secure and $this->smtp->getServerExt('STARTTLS')) {
                        $tls = true;
                    }
                    if ($tls) {
                        if (!$this->smtp->startTLS()) {
                            throw new Exception($this->lang('connect_host'));
                        }
                        // We must resend EHLO after TLS negotiation
                        $this->smtp->hello($hello);
                    }
                    if ($this->SMTPAuth) {
                        if (!$this->smtp->authenticate(
                            $this->Username,
                            $this->Password,
                            $this->AuthType,
                            $this->oauth
                        )
                        ) {
                            throw new Exception($this->lang('authenticate'));
                        }
                    }
                    return true;
                } catch (Exception $exc) {
                    $lastexception = $exc;
                    $this->edebug($exc->getMessage());
                    // We must have connected, but then failed TLS or Auth, so close connection nicely
                    $this->smtp->quit();
                }
            }
        }
        // If we get here, all connection attempts have failed, so close connection hard
        $this->smtp->close();
        // As we've caught all exceptions, just report whatever the last one was
        if ($this->exceptions and null !== $lastexception) {
            throw $lastexception;
        }
        return false;
    }
    /**
     * Close the active SMTP session if one exists.
     */
    public function smtpClose()
    {
        if (null !== $this->smtp) {
            if ($this->smtp->connected()) {
                $this->smtp->quit();
                $this->smtp->close();
            }
        }
    }
    /**
     * Set the language for error messages.
     * Returns false if it cannot load the language file.
     * The default language is English.
     *
     * @param string $langcode  ISO 639-1 2-character language code (e.g. French is "fr")
     * @param string $lang_path Path to the language file directory, with trailing separator (slash)
     *
     * @return bool
     */
    public function setLanguage($langcode = 'en', $lang_path = '')
    {
        // Backwards compatibility for renamed language codes
        $renamed_langcodes = [
            'br' => 'pt_br',
            'cz' => 'cs',
            'dk' => 'da',
            'no' => 'nb',
            'se' => 'sv',
            'rs' => 'sr',
            'tg' => 'tl',
        ];
        if (isset($renamed_langcodes[$langcode])) {
            $langcode = $renamed_langcodes[$langcode];
        }
        // Define full set of translatable strings in English
        $PHPMAILER_LANG = [
            'authenticate' => 'SMTP Error: Could not authenticate.',
            'connect_host' => 'SMTP Error: Could not connect to SMTP host.',
            'data_not_accepted' => 'SMTP Error: data not accepted.',
            'empty_message' => 'Message body empty',
            'encoding' => 'Unknown encoding: ',
            'execute' => 'Could not execute: ',
            'file_access' => 'Could not access file: ',
            'file_open' => 'File Error: Could not open file: ',
            'from_failed' => 'The following From address failed: ',
            'instantiate' => 'Could not instantiate mail function.',
            'invalid_address' => 'Invalid address: ',
            'mailer_not_supported' => ' mailer is not supported.',
            'provide_address' => 'You must provide at least one recipient email address.',
            'recipients_failed' => 'SMTP Error: The following recipients failed: ',
            'signing' => 'Signing Error: ',
            'smtp_connect_failed' => 'SMTP connect() failed.',
            'smtp_error' => 'SMTP server error: ',
            'variable_set' => 'Cannot set or reset variable: ',
            'extension_missing' => 'Extension missing: ',
        ];
        if (empty($lang_path)) {
            // Calculate an absolute path so it can work if CWD is not here
            $lang_path = dirname(__DIR__) . DIRECTORY_SEPARATOR . 'language' . DIRECTORY_SEPARATOR;
        }
        //Validate $langcode
        if (!preg_match('/^[a-z]{2}(?:_[a-zA-Z]{2})?$/', $langcode)) {
            $langcode = 'en';
        }
        $foundlang = true;
        $lang_file = $lang_path . 'phpmailer.lang-' . $langcode . '.php';
        // There is no English translation file
        if ('en' != $langcode) {
            // Make sure language file path is readable
            if (!static::isPermittedPath($lang_file) || !file_exists($lang_file)) {
                $foundlang = false;
            } else {
                // Overwrite language-specific strings.
                // This way we'll never have missing translation keys.
                $foundlang = include $lang_file;
            }
        }
        $this->language = $PHPMAILER_LANG;
        return (bool) $foundlang; // Returns false if language not found
    }
    /**
     * Get the array of strings for the current language.
     *
     * @return array
     */
    public function getTranslations()
    {
        return $this->language;
    }
    /**
     * Create recipient headers.
     *
     * @param string $type
     * @param array  $addr An array of recipients,
     *                     where each recipient is a 2-element indexed array with element 0 containing an address
     *                     and element 1 containing a name, like:
     *                     [['joe@example.com', 'Joe User'], ['zoe@example.com', 'Zoe User']]
     *
     * @return string
     */
    public function addrAppend($type, $addr)
    {
        $addresses = [];
        foreach ($addr as $address) {
            $addresses[] = $this->addrFormat($address);
        }
        return $type . ': ' . implode(', ', $addresses) . static::$LE;
    }
    /**
     * Format an address for use in a message header.
     *
     * @param array $addr A 2-element indexed array, element 0 containing an address, element 1 containing a name like
     *                    ['joe@example.com', 'Joe User']
     *
     * @return string
     */
    public function addrFormat($addr)
    {
        if (empty($addr[1])) { // No name provided
            return $this->secureHeader($addr[0]);
        }
        return $this->encodeHeader($this->secureHeader($addr[1]), 'phrase') . ' <' . $this->secureHeader(
                $addr[0]
            ) . '>';
    }
    /**
     * Word-wrap message.
     * For use with mailers that do not automatically perform wrapping
     * and for quoted-printable encoded messages.
     * Original written by philippe.
     *
     * @param string $message The message to wrap
     * @param int    $length  The line length to wrap to
     * @param bool   $qp_mode Whether to run in Quoted-Printable mode
     *
     * @return string
     */
    public function wrapText($message, $length, $qp_mode = false)
    {
        if ($qp_mode) {
            $soft_break = sprintf(' =%s', static::$LE);
        } else {
            $soft_break = static::$LE;
        }
        // If utf-8 encoding is used, we will need to make sure we don't
        // split multibyte characters when we wrap
        $is_utf8 = static::CHARSET_UTF8 === strtolower($this->CharSet);
        $lelen = strlen(static::$LE);
        $crlflen = strlen(static::$LE);
        $message = static::normalizeBreaks($message);
        //Remove a trailing line break
        if (substr($message, -$lelen) == static::$LE) {
            $message = substr($message, 0, -$lelen);
        }
        //Split message into lines
        $lines = explode(static::$LE, $message);
        //Message will be rebuilt in here
        $message = '';
        foreach ($lines as $line) {
            $words = explode(' ', $line);
            $buf = '';
            $firstword = true;
            foreach ($words as $word) {
                if ($qp_mode and (strlen($word) > $length)) {
                    $space_left = $length - strlen($buf) - $crlflen;
                    if (!$firstword) {
                        if ($space_left > 20) {
                            $len = $space_left;
                            if ($is_utf8) {
                                $len = $this->utf8CharBoundary($word, $len);
                            } elseif ('=' == substr($word, $len - 1, 1)) {
                                --$len;
                            } elseif ('=' == substr($word, $len - 2, 1)) {
                                $len -= 2;
                            }
                            $part = substr($word, 0, $len);
                            $word = substr($word, $len);
                            $buf .= ' ' . $part;
                            $message .= $buf . sprintf('=%s', static::$LE);
                        } else {
                            $message .= $buf . $soft_break;
                        }
                        $buf = '';
                    }
                    while (strlen($word) > 0) {
                        if ($length <= 0) {
                            break;
                        }
                        $len = $length;
                        if ($is_utf8) {
                            $len = $this->utf8CharBoundary($word, $len);
                        } elseif ('=' == substr($word, $len - 1, 1)) {
                            --$len;
                        } elseif ('=' == substr($word, $len - 2, 1)) {
                            $len -= 2;
                        }
                        $part = substr($word, 0, $len);
                        $word = substr($word, $len);
                        if (strlen($word) > 0) {
                            $message .= $part . sprintf('=%s', static::$LE);
                        } else {
                            $buf = $part;
                        }
                    }
                } else {
                    $buf_o = $buf;
                    if (!$firstword) {
                        $buf .= ' ';
                    }
                    $buf .= $word;
                    if (strlen($buf) > $length and '' != $buf_o) {
                        $message .= $buf_o . $soft_break;
                        $buf = $word;
                    }
                }
                $firstword = false;
            }
            $message .= $buf . static::$LE;
        }
        return $message;
    }
    /**
     * Find the last character boundary prior to $maxLength in a utf-8
     * quoted-printable encoded string.
     * Original written by Colin Brown.
     *
     * @param string $encodedText utf-8 QP text
     * @param int    $maxLength   Find the last character boundary prior to this length
     *
     * @return int
     */
    public function utf8CharBoundary($encodedText, $maxLength)
    {
        $foundSplitPos = false;
        $lookBack = 3;
        while (!$foundSplitPos) {
            $lastChunk = substr($encodedText, $maxLength - $lookBack, $lookBack);
            $encodedCharPos = strpos($lastChunk, '=');
            if (false !== $encodedCharPos) {
                // Found start of encoded character byte within $lookBack block.
                // Check the encoded byte value (the 2 chars after the '=')
                $hex = substr($encodedText, $maxLength - $lookBack + $encodedCharPos + 1, 2);
                $dec = hexdec($hex);
                if ($dec < 128) {
                    // Single byte character.
                    // If the encoded char was found at pos 0, it will fit
                    // otherwise reduce maxLength to start of the encoded char
                    if ($encodedCharPos > 0) {
                        $maxLength -= $lookBack - $encodedCharPos;
                    }
                    $foundSplitPos = true;
                } elseif ($dec >= 192) {
                    // First byte of a multi byte character
                    // Reduce maxLength to split at start of character
                    $maxLength -= $lookBack - $encodedCharPos;
                    $foundSplitPos = true;
                } elseif ($dec < 192) {
                    // Middle byte of a multi byte character, look further back
                    $lookBack += 3;
                }
            } else {
                // No encoded character found
                $foundSplitPos = true;
            }
        }
        return $maxLength;
    }
    /**
     * Apply word wrapping to the message body.
     * Wraps the message body to the number of chars set in the WordWrap property.
     * You should only do this to plain-text bodies as wrapping HTML tags may break them.
     * This is called automatically by createBody(), so you don't need to call it yourself.
     */
    public function setWordWrap()
    {
        if ($this->WordWrap < 1) {
            return;
        }
        switch ($this->message_type) {
            case 'alt':
            case 'alt_inline':
            case 'alt_attach':
            case 'alt_inline_attach':
                $this->AltBody = $this->wrapText($this->AltBody, $this->WordWrap);
                break;
            default:
                $this->Body = $this->wrapText($this->Body, $this->WordWrap);
                break;
        }
    }
    /**
     * Assemble message headers.
     *
     * @return string The assembled headers
     */
    public function createHeader()
    {
        $result = '';
        $result .= $this->headerLine('Date', '' == $this->MessageDate ? self::rfcDate() : $this->MessageDate);
        // To be created automatically by mail()
        if ($this->SingleTo) {
            if ('mail' != $this->Mailer) {
                foreach ($this->to as $toaddr) {
                    $this->SingleToArray[] = $this->addrFormat($toaddr);
                }
            }
        } else {
            if (count($this->to) > 0) {
                if ('mail' != $this->Mailer) {
                    $result .= $this->addrAppend('To', $this->to);
                }
            } elseif (count($this->cc) == 0) {
                $result .= $this->headerLine('To', 'undisclosed-recipients:;');
            }
        }
        $result .= $this->addrAppend('From', [[trim($this->From), $this->FromName]]);
        // sendmail and mail() extract Cc from the header before sending
        if (count($this->cc) > 0) {
            $result .= $this->addrAppend('Cc', $this->cc);
        }
        // sendmail and mail() extract Bcc from the header before sending
        if ((
                'sendmail' == $this->Mailer or 'qmail' == $this->Mailer or 'mail' == $this->Mailer
            )
            and count($this->bcc) > 0
        ) {
            $result .= $this->addrAppend('Bcc', $this->bcc);
        }
        if (count($this->ReplyTo) > 0) {
            $result .= $this->addrAppend('Reply-To', $this->ReplyTo);
        }
        // mail() sets the subject itself
        if ('mail' != $this->Mailer) {
            $result .= $this->headerLine('Subject', $this->encodeHeader($this->secureHeader($this->Subject)));
        }
        // Only allow a custom message ID if it conforms to RFC 5322 section 3.6.4
        // https://tools.ietf.org/html/rfc5322#section-3.6.4
        if ('' != $this->MessageID and preg_match('/^<.*@.*>$/', $this->MessageID)) {
            $this->lastMessageID = $this->MessageID;
        } else {
            $this->lastMessageID = sprintf('<%s@%s>', $this->uniqueid, $this->serverHostname());
        }
        $result .= $this->headerLine('Message-ID', $this->lastMessageID);
        if (null !== $this->Priority) {
            $result .= $this->headerLine('X-Priority', $this->Priority);
        }
        if ('' == $this->XMailer) {
            $result .= $this->headerLine(
                'X-Mailer',
                'PHPMailer ' . self::VERSION
            );
        } else {
            $myXmailer = trim($this->XMailer);
            if ($myXmailer) {
                $result .= $this->headerLine('X-Mailer', $myXmailer);
            }
        }
        if ('' != $this->ConfirmReadingTo) {
            $result .= $this->headerLine('Disposition-Notification-To', '<' . $this->ConfirmReadingTo . '>');
        }
        // Add custom headers
        foreach ($this->CustomHeader as $header) {
            $result .= $this->headerLine(
                trim($header[0]),
                $this->encodeHeader(trim($header[1]))
            );
        }
        if (!$this->sign_key_file) {
            $result .= $this->headerLine('MIME-Version', '1.0');
            $result .= $this->getMailMIME();
        }
        return $result;
    }
    /**
     * Get the message MIME type headers.
     *
     * @return string
     */
    public function getMailMIME()
    {
        $result = '';
        $ismultipart = true;
        switch ($this->message_type) {
            case 'inline':
                $result .= $this->headerLine('Content-Type', static::CONTENT_TYPE_MULTIPART_RELATED . ';');
                $result .= $this->textLine("\tboundary=\"" . $this->boundary[1] . '"');
                break;
            case 'attach':
            case 'inline_attach':
            case 'alt_attach':
            case 'alt_inline_attach':
                $result .= $this->headerLine('Content-Type', static::CONTENT_TYPE_MULTIPART_MIXED . ';');
                $result .= $this->textLine("\tboundary=\"" . $this->boundary[1] . '"');
                break;
            case 'alt':
            case 'alt_inline':
                $result .= $this->headerLine('Content-Type', static::CONTENT_TYPE_MULTIPART_ALTERNATIVE . ';');
                $result .= $this->textLine("\tboundary=\"" . $this->boundary[1] . '"');
                break;
            default:
                // Catches case 'plain': and case '':
                $result .= $this->textLine('Content-Type: ' . $this->ContentType . '; charset=' . $this->CharSet);
                $ismultipart = false;
                break;
        }
        // RFC1341 part 5 says 7bit is assumed if not specified
        if (static::ENCODING_7BIT != $this->Encoding) {
            // RFC 2045 section 6.4 says multipart MIME parts may only use 7bit, 8bit or binary CTE
            if ($ismultipart) {
                if (static::ENCODING_8BIT == $this->Encoding) {
                    $result .= $this->headerLine('Content-Transfer-Encoding', static::ENCODING_8BIT);
                }
                // The only remaining alternatives are quoted-printable and base64, which are both 7bit compatible
            } else {
                $result .= $this->headerLine('Content-Transfer-Encoding', $this->Encoding);
            }
        }
        if ('mail' != $this->Mailer) {
            $result .= static::$LE;
        }
        return $result;
    }
    /**
     * Returns the whole MIME message.
     * Includes complete headers and body.
     * Only valid post preSend().
     *
     * @see PHPMailer::preSend()
     *
     * @return string
     */
    public function getSentMIMEMessage()
    {
        return rtrim($this->MIMEHeader . $this->mailHeader, "\n\r") . static::$LE . static::$LE . $this->MIMEBody;
    }
    /**
     * Create a unique ID to use for boundaries.
     *
     * @return string
     */
    protected function generateId()
    {
        $len = 32; //32 bytes = 256 bits
        if (function_exists('random_bytes')) {
            $bytes = random_bytes($len);
        } elseif (function_exists('openssl_random_pseudo_bytes')) {
            $bytes = openssl_random_pseudo_bytes($len);
        } else {
            //Use a hash to force the length to the same as the other methods
            $bytes = hash('sha256', uniqid((string) mt_rand(), true), true);
        }
        //We don't care about messing up base64 format here, just want a random string
        return str_replace(['=', '+', '/'], '', base64_encode(hash('sha256', $bytes, true)));
    }
    /**
     * Assemble the message body.
     * Returns an empty string on failure.
     *
     * @throws Exception
     *
     * @return string The assembled message body
     */
    public function createBody()
    {
        $body = '';
        //Create unique IDs and preset boundaries
        $this->uniqueid = $this->generateId();
        $this->boundary[1] = 'b1_' . $this->uniqueid;
        $this->boundary[2] = 'b2_' . $this->uniqueid;
        $this->boundary[3] = 'b3_' . $this->uniqueid;
        if ($this->sign_key_file) {
            $body .= $this->getMailMIME() . static::$LE;
        }
        $this->setWordWrap();
        $bodyEncoding = $this->Encoding;
        $bodyCharSet = $this->CharSet;
        //Can we do a 7-bit downgrade?
        if (static::ENCODING_8BIT == $bodyEncoding and !$this->has8bitChars($this->Body)) {
            $bodyEncoding = static::ENCODING_7BIT;
            //All ISO 8859, Windows codepage and UTF-8 charsets are ascii compatible up to 7-bit
            $bodyCharSet = 'us-ascii';
        }
        //If lines are too long, and we're not already using an encoding that will shorten them,
        //change to quoted-printable transfer encoding for the body part only
        if (static::ENCODING_BASE64 != $this->Encoding and static::hasLineLongerThanMax($this->Body)) {
            $bodyEncoding = static::ENCODING_QUOTED_PRINTABLE;
        }
        $altBodyEncoding = $this->Encoding;
        $altBodyCharSet = $this->CharSet;
        //Can we do a 7-bit downgrade?
        if (static::ENCODING_8BIT == $altBodyEncoding and !$this->has8bitChars($this->AltBody)) {
            $altBodyEncoding = static::ENCODING_7BIT;
            //All ISO 8859, Windows codepage and UTF-8 charsets are ascii compatible up to 7-bit
            $altBodyCharSet = 'us-ascii';
        }
        //If lines are too long, and we're not already using an encoding that will shorten them,
        //change to quoted-printable transfer encoding for the alt body part only
        if (static::ENCODING_BASE64 != $altBodyEncoding and static::hasLineLongerThanMax($this->AltBody)) {
            $altBodyEncoding = static::ENCODING_QUOTED_PRINTABLE;
        }
        //Use this as a preamble in all multipart message types
        $mimepre = 'This is a multi-part message in MIME format.' . static::$LE;
        switch ($this->message_type) {
            case 'inline':
                $body .= $mimepre;
                $body .= $this->getBoundary($this->boundary[1], $bodyCharSet, '', $bodyEncoding);
                $body .= $this->encodeString($this->Body, $bodyEncoding);
                $body .= static::$LE;
                $body .= $this->attachAll('inline', $this->boundary[1]);
                break;
            case 'attach':
                $body .= $mimepre;
                $body .= $this->getBoundary($this->boundary[1], $bodyCharSet, '', $bodyEncoding);
                $body .= $this->encodeString($this->Body, $bodyEncoding);
                $body .= static::$LE;
                $body .= $this->attachAll('attachment', $this->boundary[1]);
                break;
            case 'inline_attach':
                $body .= $mimepre;
                $body .= $this->textLine('--' . $this->boundary[1]);
                $body .= $this->headerLine('Content-Type', static::CONTENT_TYPE_MULTIPART_RELATED . ';');
                $body .= $this->textLine("\tboundary=\"" . $this->boundary[2] . '"');
                $body .= static::$LE;
                $body .= $this->getBoundary($this->boundary[2], $bodyCharSet, '', $bodyEncoding);
                $body .= $this->encodeString($this->Body, $bodyEncoding);
                $body .= static::$LE;
                $body .= $this->attachAll('inline', $this->boundary[2]);
                $body .= static::$LE;
                $body .= $this->attachAll('attachment', $this->boundary[1]);
                break;
            case 'alt':
                $body .= $mimepre;
                $body .= $this->getBoundary($this->boundary[1], $altBodyCharSet, static::CONTENT_TYPE_PLAINTEXT, $altBodyEncoding);
                $body .= $this->encodeString($this->AltBody, $altBodyEncoding);
                $body .= static::$LE;
                $body .= $this->getBoundary($this->boundary[1], $bodyCharSet, static::CONTENT_TYPE_TEXT_HTML, $bodyEncoding);
                $body .= $this->encodeString($this->Body, $bodyEncoding);
                $body .= static::$LE;
                if (!empty($this->Ical)) {
                    $body .= $this->getBoundary($this->boundary[1], '', static::CONTENT_TYPE_TEXT_CALENDAR . '; method=REQUEST', '');
                    $body .= $this->encodeString($this->Ical, $this->Encoding);
                    $body .= static::$LE;
                }
                $body .= $this->endBoundary($this->boundary[1]);
                break;
            case 'alt_inline':
                $body .= $mimepre;
                $body .= $this->getBoundary($this->boundary[1], $altBodyCharSet, static::CONTENT_TYPE_PLAINTEXT, $altBodyEncoding);
                $body .= $this->encodeString($this->AltBody, $altBodyEncoding);
                $body .= static::$LE;
                $body .= $this->textLine('--' . $this->boundary[1]);
                $body .= $this->headerLine('Content-Type', static::CONTENT_TYPE_MULTIPART_RELATED . ';');
                $body .= $this->textLine("\tboundary=\"" . $this->boundary[2] . '"');
                $body .= static::$LE;
                $body .= $this->getBoundary($this->boundary[2], $bodyCharSet, static::CONTENT_TYPE_TEXT_HTML, $bodyEncoding);
                $body .= $this->encodeString($this->Body, $bodyEncoding);
                $body .= static::$LE;
                $body .= $this->attachAll('inline', $this->boundary[2]);
                $body .= static::$LE;
                $body .= $this->endBoundary($this->boundary[1]);
                break;
            case 'alt_attach':
                $body .= $mimepre;
                $body .= $this->textLine('--' . $this->boundary[1]);
                $body .= $this->headerLine('Content-Type', static::CONTENT_TYPE_MULTIPART_ALTERNATIVE . ';');
                $body .= $this->textLine("\tboundary=\"" . $this->boundary[2] . '"');
                $body .= static::$LE;
                $body .= $this->getBoundary($this->boundary[2], $altBodyCharSet, static::CONTENT_TYPE_PLAINTEXT, $altBodyEncoding);
                $body .= $this->encodeString($this->AltBody, $altBodyEncoding);
                $body .= static::$LE;
                $body .= $this->getBoundary($this->boundary[2], $bodyCharSet, static::CONTENT_TYPE_TEXT_HTML, $bodyEncoding);
                $body .= $this->encodeString($this->Body, $bodyEncoding);
                $body .= static::$LE;
                if (!empty($this->Ical)) {
                    $body .= $this->getBoundary($this->boundary[2], '', static::CONTENT_TYPE_TEXT_CALENDAR . '; method=REQUEST', '');
                    $body .= $this->encodeString($this->Ical, $this->Encoding);
                }
                $body .= $this->endBoundary($this->boundary[2]);
                $body .= static::$LE;
                $body .= $this->attachAll('attachment', $this->boundary[1]);
                break;
            case 'alt_inline_attach':
                $body .= $mimepre;
                $body .= $this->textLine('--' . $this->boundary[1]);
                $body .= $this->headerLine('Content-Type', static::CONTENT_TYPE_MULTIPART_ALTERNATIVE . ';');
                $body .= $this->textLine("\tboundary=\"" . $this->boundary[2] . '"');
                $body .= static::$LE;
                $body .= $this->getBoundary($this->boundary[2], $altBodyCharSet, static::CONTENT_TYPE_PLAINTEXT, $altBodyEncoding);
                $body .= $this->encodeString($this->AltBody, $altBodyEncoding);
                $body .= static::$LE;
                $body .= $this->textLine('--' . $this->boundary[2]);
                $body .= $this->headerLine('Content-Type', static::CONTENT_TYPE_MULTIPART_RELATED . ';');
                $body .= $this->textLine("\tboundary=\"" . $this->boundary[3] . '"');
                $body .= static::$LE;
                $body .= $this->getBoundary($this->boundary[3], $bodyCharSet, static::CONTENT_TYPE_TEXT_HTML, $bodyEncoding);
                $body .= $this->encodeString($this->Body, $bodyEncoding);
                $body .= static::$LE;
                $body .= $this->attachAll('inline', $this->boundary[3]);
                $body .= static::$LE;
                $body .= $this->endBoundary($this->boundary[2]);
                $body .= static::$LE;
                $body .= $this->attachAll('attachment', $this->boundary[1]);
                break;
            default:
                // Catch case 'plain' and case '', applies to simple `text/plain` and `text/html` body content types
                //Reset the `Encoding` property in case we changed it for line length reasons
                $this->Encoding = $bodyEncoding;
                $body .= $this->encodeString($this->Body, $this->Encoding);
                break;
        }
        if ($this->isError()) {
            $body = '';
            if ($this->exceptions) {
                throw new Exception($this->lang('empty_message'), self::STOP_CRITICAL);
            }
        } elseif ($this->sign_key_file) {
            try {
                if (!defined('PKCS7_TEXT')) {
                    throw new Exception($this->lang('extension_missing') . 'openssl');
                }
                $file = fopen('php://temp', 'rb+');
                $signed = fopen('php://temp', 'rb+');
                fwrite($file, $body);
                //Workaround for PHP bug https://bugs.php.net/bug.php?id=69197
                if (empty($this->sign_extracerts_file)) {
                    $sign = @openssl_pkcs7_sign(
                        $file,
                        $signed,
                        'file://' . realpath($this->sign_cert_file),
                        ['file://' . realpath($this->sign_key_file), $this->sign_key_pass],
                        []
                    );
                } else {
                    $sign = @openssl_pkcs7_sign(
                        $file,
                        $signed,
                        'file://' . realpath($this->sign_cert_file),
                        ['file://' . realpath($this->sign_key_file), $this->sign_key_pass],
                        [],
                        PKCS7_DETACHED,
                        $this->sign_extracerts_file
                    );
                }
                fclose($file);
                if ($sign) {
                    $body = file_get_contents($signed);
                    fclose($signed);
                    //The message returned by openssl contains both headers and body, so need to split them up
                    $parts = explode("\n\n", $body, 2);
                    $this->MIMEHeader .= $parts[0] . static::$LE . static::$LE;
                    $body = $parts[1];
                } else {
                    fclose($signed);
                    throw new Exception($this->lang('signing') . openssl_error_string());
                }
            } catch (Exception $exc) {
                $body = '';
                if ($this->exceptions) {
                    throw $exc;
                }
            }
        }
        return $body;
    }
    /**
     * Return the start of a message boundary.
     *
     * @param string $boundary
     * @param string $charSet
     * @param string $contentType
     * @param string $encoding
     *
     * @return string
     */
    protected function getBoundary($boundary, $charSet, $contentType, $encoding)
    {
        $result = '';
        if ('' == $charSet) {
            $charSet = $this->CharSet;
        }
        if ('' == $contentType) {
            $contentType = $this->ContentType;
        }
        if ('' == $encoding) {
            $encoding = $this->Encoding;
        }
        $result .= $this->textLine('--' . $boundary);
        $result .= sprintf('Content-Type: %s; charset=%s', $contentType, $charSet);
        $result .= static::$LE;
        // RFC1341 part 5 says 7bit is assumed if not specified
        if (static::ENCODING_7BIT != $encoding) {
            $result .= $this->headerLine('Content-Transfer-Encoding', $encoding);
        }
        $result .= static::$LE;
        return $result;
    }
    /**
     * Return the end of a message boundary.
     *
     * @param string $boundary
     *
     * @return string
     */
    protected function endBoundary($boundary)
    {
        return static::$LE . '--' . $boundary . '--' . static::$LE;
    }
    /**
     * Set the message type.
     * PHPMailer only supports some preset message types, not arbitrary MIME structures.
     */
    protected function setMessageType()
    {
        $type = [];
        if ($this->alternativeExists()) {
            $type[] = 'alt';
        }
        if ($this->inlineImageExists()) {
            $type[] = 'inline';
        }
        if ($this->attachmentExists()) {
            $type[] = 'attach';
        }
        $this->message_type = implode('_', $type);
        if ('' == $this->message_type) {
            //The 'plain' message_type refers to the message having a single body element, not that it is plain-text
            $this->message_type = 'plain';
        }
    }
    /**
     * Format a header line.
     *
     * @param string     $name
     * @param string|int $value
     *
     * @return string
     */
    public function headerLine($name, $value)
    {
        return $name . ': ' . $value . static::$LE;
    }
    /**
     * Return a formatted mail line.
     *
     * @param string $value
     *
     * @return string
     */
    public function textLine($value)
    {
        return $value . static::$LE;
    }
    /**
     * Add an attachment from a path on the filesystem.
     * Never use a user-supplied path to a file!
     * Returns false if the file could not be found or read.
     * Explicitly *does not* support passing URLs; PHPMailer is not an HTTP client.
     * If you need to do that, fetch the resource yourself and pass it in via a local file or string.
     *
     * @param string $path        Path to the attachment
     * @param string $name        Overrides the attachment name
     * @param string $encoding    File encoding (see $Encoding)
     * @param string $type        File extension (MIME) type
     * @param string $disposition Disposition to use
     *
     * @throws Exception
     *
     * @return bool
     */
    public function addAttachment($path, $name = '', $encoding = self::ENCODING_BASE64, $type = '', $disposition = 'attachment')
    {
        try {
            if (!static::isPermittedPath($path) || !@is_file($path)) {
                throw new Exception($this->lang('file_access') . $path, self::STOP_CONTINUE);
            }
            // If a MIME type is not specified, try to work it out from the file name
            if ('' == $type) {
                $type = static::filenameToType($path);
            }
            $filename = basename($path);
            if ('' == $name) {
                $name = $filename;
            }
            $this->attachment[] = [
                0 => $path,
                1 => $filename,
                2 => $name,
                3 => $encoding,
                4 => $type,
                5 => false, // isStringAttachment
                6 => $disposition,
                7 => $name,
            ];
        } catch (Exception $exc) {
            $this->setError($exc->getMessage());
            $this->edebug($exc->getMessage());
            if ($this->exceptions) {
                throw $exc;
            }
            return false;
        }
        return true;
    }
    /**
     * Return the array of attachments.
     *
     * @return array
     */
    public function getAttachments()
    {
        return $this->attachment;
    }
    /**
     * Attach all file, string, and binary attachments to the message.
     * Returns an empty string on failure.
     *
     * @param string $disposition_type
     * @param string $boundary
     *
     * @return string
     */
    protected function attachAll($disposition_type, $boundary)
    {
        // Return text of body
        $mime = [];
        $cidUniq = [];
        $incl = [];
        // Add all attachments
        foreach ($this->attachment as $attachment) {
            // Check if it is a valid disposition_filter
            if ($attachment[6] == $disposition_type) {
                // Check for string attachment
                $string = '';
                $path = '';
                $bString = $attachment[5];
                if ($bString) {
                    $string = $attachment[0];
                } else {
                    $path = $attachment[0];
                }
                $inclhash = hash('sha256', serialize($attachment));
                if (in_array($inclhash, $incl)) {
                    continue;
                }
                $incl[] = $inclhash;
                $name = $attachment[2];
                $encoding = $attachment[3];
                $type = $attachment[4];
                $disposition = $attachment[6];
                $cid = $attachment[7];
                if ('inline' == $disposition and array_key_exists($cid, $cidUniq)) {
                    continue;
                }
                $cidUniq[$cid] = true;
                $mime[] = sprintf('--%s%s', $boundary, static::$LE);
                //Only include a filename property if we have one
                if (!empty($name)) {
                    $mime[] = sprintf(
                        'Content-Type: %s; name="%s"%s',
                        $type,
                        $this->encodeHeader($this->secureHeader($name)),
                        static::$LE
                    );
                } else {
                    $mime[] = sprintf(
                        'Content-Type: %s%s',
                        $type,
                        static::$LE
                    );
                }
                // RFC1341 part 5 says 7bit is assumed if not specified
                if (static::ENCODING_7BIT != $encoding) {
                    $mime[] = sprintf('Content-Transfer-Encoding: %s%s', $encoding, static::$LE);
                }
                if (!empty($cid)) {
                    $mime[] = sprintf('Content-ID: <%s>%s', $cid, static::$LE);
                }
                // If a filename contains any of these chars, it should be quoted,
                // but not otherwise: RFC2183 & RFC2045 5.1
                // Fixes a warning in IETF's msglint MIME checker
                // Allow for bypassing the Content-Disposition header totally
                if (!(empty($disposition))) {
                    $encoded_name = $this->encodeHeader($this->secureHeader($name));
                    if (preg_match('/[ <>@,;:\\"\/\[\]\?=]/', $encoded_name)) {
                        $mime[] = sprintf(
                            'Content-Disposition: %s; filename="%s"%s',
                            $disposition,
                            $encoded_name,
                            static::$LE . static::$LE
                        );
                    } else {
                        if (!empty($encoded_name)) {
                            $mime[] = sprintf(
                                'Content-Disposition: %s; filename=%s%s',
                                $disposition,
                                $encoded_name,
                                static::$LE . static::$LE
                            );
                        } else {
                            $mime[] = sprintf(
                                'Content-Disposition: %s%s',
                                $disposition,
                                static::$LE . static::$LE
                            );
                        }
                    }
                } else {
                    $mime[] = static::$LE;
                }
                // Encode as string attachment
                if ($bString) {
                    $mime[] = $this->encodeString($string, $encoding);
                } else {
                    $mime[] = $this->encodeFile($path, $encoding);
                }
                if ($this->isError()) {
                    return '';
                }
                $mime[] = static::$LE;
            }
        }
        $mime[] = sprintf('--%s--%s', $boundary, static::$LE);
        return implode('', $mime);
    }
    /**
     * Encode a file attachment in requested format.
     * Returns an empty string on failure.
     *
     * @param string $path     The full path to the file
     * @param string $encoding The encoding to use; one of 'base64', '7bit', '8bit', 'binary', 'quoted-printable'
     *
     * @throws Exception
     *
     * @return string
     */
    protected function encodeFile($path, $encoding = self::ENCODING_BASE64)
    {
        try {
            if (!static::isPermittedPath($path) || !file_exists($path)) {
                throw new Exception($this->lang('file_open') . $path, self::STOP_CONTINUE);
            }
            $file_buffer = file_get_contents($path);
            if (false === $file_buffer) {
                throw new Exception($this->lang('file_open') . $path, self::STOP_CONTINUE);
            }
            $file_buffer = $this->encodeString($file_buffer, $encoding);
            return $file_buffer;
        } catch (Exception $exc) {
            $this->setError($exc->getMessage());
            return '';
        }
    }
    /**
     * Encode a string in requested format.
     * Returns an empty string on failure.
     *
     * @param string $str      The text to encode
     * @param string $encoding The encoding to use; one of 'base64', '7bit', '8bit', 'binary', 'quoted-printable'
     *
     * @return string
     */
    public function encodeString($str, $encoding = self::ENCODING_BASE64)
    {
        $encoded = '';
        switch (strtolower($encoding)) {
            case static::ENCODING_BASE64:
                $encoded = chunk_split(
                    base64_encode($str),
                    static::STD_LINE_LENGTH,
                    static::$LE
                );
                break;
            case static::ENCODING_7BIT:
            case static::ENCODING_8BIT:
                $encoded = static::normalizeBreaks($str);
                // Make sure it ends with a line break
                if (substr($encoded, -(strlen(static::$LE))) != static::$LE) {
                    $encoded .= static::$LE;
                }
                break;
            case static::ENCODING_BINARY:
                $encoded = $str;
                break;
            case static::ENCODING_QUOTED_PRINTABLE:
                $encoded = $this->encodeQP($str);
                break;
            default:
                $this->setError($this->lang('encoding') . $encoding);
                break;
        }
        return $encoded;
    }
    /**
     * Encode a header value (not including its label) optimally.
     * Picks shortest of Q, B, or none. Result includes folding if needed.
     * See RFC822 definitions for phrase, comment and text positions.
     *
     * @param string $str      The header value to encode
     * @param string $position What context the string will be used in
     *
     * @return string
     */
    public function encodeHeader($str, $position = 'text')
    {
        $matchcount = 0;
        switch (strtolower($position)) {
            case 'phrase':
                if (!preg_match('/[\200-\377]/', $str)) {
                    // Can't use addslashes as we don't know the value of magic_quotes_sybase
                    $encoded = addcslashes($str, "\0..\37\177\\\"");
                    if (($str == $encoded) and !preg_match('/[^A-Za-z0-9!#$%&\'*+\/=?^_`{|}~ -]/', $str)) {
                        return $encoded;
                    }
                    return "\"$encoded\"";
                }
                $matchcount = preg_match_all('/[^\040\041\043-\133\135-\176]/', $str, $matches);
                break;
            /* @noinspection PhpMissingBreakStatementInspection */
            case 'comment':
                $matchcount = preg_match_all('/[()"]/', $str, $matches);
            //fallthrough
            case 'text':
            default:
                $matchcount += preg_match_all('/[\000-\010\013\014\016-\037\177-\377]/', $str, $matches);
                break;
        }
        //RFCs specify a maximum line length of 78 chars, however mail() will sometimes
        //corrupt messages with headers longer than 65 chars. See #818
        $lengthsub = 'mail' == $this->Mailer ? 13 : 0;
        $maxlen = static::STD_LINE_LENGTH - $lengthsub;
        // Try to select the encoding which should produce the shortest output
        if ($matchcount > strlen($str) / 3) {
            // More than a third of the content will need encoding, so B encoding will be most efficient
            $encoding = 'B';
            //This calculation is:
            // max line length
            // - shorten to avoid mail() corruption
            // - Q/B encoding char overhead ("` =?<charset>?[QB]?<content>?=`")
            // - charset name length
            $maxlen = static::STD_LINE_LENGTH - $lengthsub - 8 - strlen($this->CharSet);
            if ($this->hasMultiBytes($str)) {
                // Use a custom function which correctly encodes and wraps long
                // multibyte strings without breaking lines within a character
                $encoded = $this->base64EncodeWrapMB($str, "\n");
            } else {
                $encoded = base64_encode($str);
                $maxlen -= $maxlen % 4;
                $encoded = trim(chunk_split($encoded, $maxlen, "\n"));
            }
            $encoded = preg_replace('/^(.*)$/m', ' =?' . $this->CharSet . "?$encoding?\\1?=", $encoded);
        } elseif ($matchcount > 0) {
            //1 or more chars need encoding, use Q-encode
            $encoding = 'Q';
            //Recalc max line length for Q encoding - see comments on B encode
            $maxlen = static::STD_LINE_LENGTH - $lengthsub - 8 - strlen($this->CharSet);
            $encoded = $this->encodeQ($str, $position);
            $encoded = $this->wrapText($encoded, $maxlen, true);
            $encoded = str_replace('=' . static::$LE, "\n", trim($encoded));
            $encoded = preg_replace('/^(.*)$/m', ' =?' . $this->CharSet . "?$encoding?\\1?=", $encoded);
        } elseif (strlen($str) > $maxlen) {
            //No chars need encoding, but line is too long, so fold it
            $encoded = trim($this->wrapText($str, $maxlen, false));
            if ($str == $encoded) {
                //Wrapping nicely didn't work, wrap hard instead
                $encoded = trim(chunk_split($str, static::STD_LINE_LENGTH, static::$LE));
            }
            $encoded = str_replace(static::$LE, "\n", trim($encoded));
            $encoded = preg_replace('/^(.*)$/m', ' \\1', $encoded);
        } else {
            //No reformatting needed
            return $str;
        }
        return trim(static::normalizeBreaks($encoded));
    }
    /**
     * Check if a string contains multi-byte characters.
     *
     * @param string $str multi-byte text to wrap encode
     *
     * @return bool
     */
    public function hasMultiBytes($str)
    {
        if (function_exists('mb_strlen')) {
            return strlen($str) > mb_strlen($str, $this->CharSet);
        }
        // Assume no multibytes (we can't handle without mbstring functions anyway)
        return false;
    }
    /**
     * Does a string contain any 8-bit chars (in any charset)?
     *
     * @param string $text
     *
     * @return bool
     */
    public function has8bitChars($text)
    {
        return (bool) preg_match('/[\x80-\xFF]/', $text);
    }
    /**
     * Encode and wrap long multibyte strings for mail headers
     * without breaking lines within a character.
     * Adapted from a function by paravoid.
     *
     * @see http://www.php.net/manual/en/function.mb-encode-mimeheader.php#60283
     *
     * @param string $str       multi-byte text to wrap encode
     * @param string $linebreak string to use as linefeed/end-of-line
     *
     * @return string
     */
    public function base64EncodeWrapMB($str, $linebreak = null)
    {
        $start = '=?' . $this->CharSet . '?B?';
        $end = '?=';
        $encoded = '';
        if (null === $linebreak) {
            $linebreak = static::$LE;
        }
        $mb_length = mb_strlen($str, $this->CharSet);
        // Each line must have length <= 75, including $start and $end
        $length = 75 - strlen($start) - strlen($end);
        // Average multi-byte ratio
        $ratio = $mb_length / strlen($str);
        // Base64 has a 4:3 ratio
        $avgLength = floor($length * $ratio * .75);
        for ($i = 0; $i < $mb_length; $i += $offset) {
            $lookBack = 0;
            do {
                $offset = $avgLength - $lookBack;
                $chunk = mb_substr($str, $i, $offset, $this->CharSet);
                $chunk = base64_encode($chunk);
                ++$lookBack;
            } while (strlen($chunk) > $length);
            $encoded .= $chunk . $linebreak;
        }
        // Chomp the last linefeed
        return substr($encoded, 0, -strlen($linebreak));
    }
    /**
     * Encode a string in quoted-printable format.
     * According to RFC2045 section 6.7.
     *
     * @param string $string The text to encode
     *
     * @return string
     */
    public function encodeQP($string)
    {
        return static::normalizeBreaks(quoted_printable_encode($string));
    }
    /**
     * Encode a string using Q encoding.
     *
     * @see http://tools.ietf.org/html/rfc2047#section-4.2
     *
     * @param string $str      the text to encode
     * @param string $position Where the text is going to be used, see the RFC for what that means
     *
     * @return string
     */
    public function encodeQ($str, $position = 'text')
    {
        // There should not be any EOL in the string
        $pattern = '';
        $encoded = str_replace(["\r", "\n"], '', $str);
        switch (strtolower($position)) {
            case 'phrase':
                // RFC 2047 section 5.3
                $pattern = '^A-Za-z0-9!*+\/ -';
                break;
            /*
             * RFC 2047 section 5.2.
             * Build $pattern without including delimiters and []
             */
            /* @noinspection PhpMissingBreakStatementInspection */
            case 'comment':
                $pattern = '"';
            /* Intentional fall through */
            case 'text':
            default:
                // RFC 2047 section 5.1
                // Replace every high ascii, control, =, ? and _ characters
                /** @noinspection SuspiciousAssignmentsInspection */
                $pattern = '\000-\011\013\014\016-\037\075\077\137\177-\377' . $pattern;
                break;
        }
        $matches = [];
        if (preg_match_all("/[{$pattern}]/", $encoded, $matches)) {
            // If the string contains an '=', make sure it's the first thing we replace
            // so as to avoid double-encoding
            $eqkey = array_search('=', $matches[0]);
            if (false !== $eqkey) {
                unset($matches[0][$eqkey]);
                array_unshift($matches[0], '=');
            }
            foreach (array_unique($matches[0]) as $char) {
                $encoded = str_replace($char, '=' . sprintf('%02X', ord($char)), $encoded);
            }
        }
        // Replace spaces with _ (more readable than =20)
        // RFC 2047 section 4.2(2)
        return str_replace(' ', '_', $encoded);
    }
    /**
     * Add a string or binary attachment (non-filesystem).
     * This method can be used to attach ascii or binary data,
     * such as a BLOB record from a database.
     *
     * @param string $string      String attachment data
     * @param string $filename    Name of the attachment
     * @param string $encoding    File encoding (see $Encoding)
     * @param string $type        File extension (MIME) type
     * @param string $disposition Disposition to use
     */
    public function addStringAttachment(
        $string,
        $filename,
        $encoding = self::ENCODING_BASE64,
        $type = '',
        $disposition = 'attachment'
    ) {
        // If a MIME type is not specified, try to work it out from the file name
        if ('' == $type) {
            $type = static::filenameToType($filename);
        }
        // Append to $attachment array
        $this->attachment[] = [
            0 => $string,
            1 => $filename,
            2 => basename($filename),
            3 => $encoding,
            4 => $type,
            5 => true, // isStringAttachment
            6 => $disposition,
            7 => 0,
        ];
    }
    /**
     * Add an embedded (inline) attachment from a file.
     * This can include images, sounds, and just about any other document type.
     * These differ from 'regular' attachments in that they are intended to be
     * displayed inline with the message, not just attached for download.
     * This is used in HTML messages that embed the images
     * the HTML refers to using the $cid value.
     * Never use a user-supplied path to a file!
     *
     * @param string $path        Path to the attachment
     * @param string $cid         Content ID of the attachment; Use this to reference
     *                            the content when using an embedded image in HTML
     * @param string $name        Overrides the attachment name
     * @param string $encoding    File encoding (see $Encoding)
     * @param string $type        File MIME type
     * @param string $disposition Disposition to use
     *
     * @return bool True on successfully adding an attachment
     */
    public function addEmbeddedImage($path, $cid, $name = '', $encoding = self::ENCODING_BASE64, $type = '', $disposition = 'inline')
    {
        if (!static::isPermittedPath($path) || !@is_file($path)) {
            $this->setError($this->lang('file_access') . $path);
            return false;
        }
        // If a MIME type is not specified, try to work it out from the file name
        if ('' == $type) {
            $type = static::filenameToType($path);
        }
        $filename = basename($path);
        if ('' == $name) {
            $name = $filename;
        }
        // Append to $attachment array
        $this->attachment[] = [
            0 => $path,
            1 => $filename,
            2 => $name,
            3 => $encoding,
            4 => $type,
            5 => false, // isStringAttachment
            6 => $disposition,
            7 => $cid,
        ];
        return true;
    }
    /**
     * Add an embedded stringified attachment.
     * This can include images, sounds, and just about any other document type.
     * If your filename doesn't contain an extension, be sure to set the $type to an appropriate MIME type.
     *
     * @param string $string      The attachment binary data
     * @param string $cid         Content ID of the attachment; Use this to reference
     *                            the content when using an embedded image in HTML
     * @param string $name        A filename for the attachment. If this contains an extension,
     *                            PHPMailer will attempt to set a MIME type for the attachment.
     *                            For example 'file.jpg' would get an 'image/jpeg' MIME type.
     * @param string $encoding    File encoding (see $Encoding), defaults to 'base64'
     * @param string $type        MIME type - will be used in preference to any automatically derived type
     * @param string $disposition Disposition to use
     *
     * @return bool True on successfully adding an attachment
     */
    public function addStringEmbeddedImage(
        $string,
        $cid,
        $name = '',
        $encoding = self::ENCODING_BASE64,
        $type = '',
        $disposition = 'inline'
    ) {
        // If a MIME type is not specified, try to work it out from the name
        if ('' == $type and !empty($name)) {
            $type = static::filenameToType($name);
        }
        // Append to $attachment array
        $this->attachment[] = [
            0 => $string,
            1 => $name,
            2 => $name,
            3 => $encoding,
            4 => $type,
            5 => true, // isStringAttachment
            6 => $disposition,
            7 => $cid,
        ];
        return true;
    }
    /**
     * Check if an embedded attachment is present with this cid.
     *
     * @param string $cid
     *
     * @return bool
     */
    protected function cidExists($cid)
    {
        foreach ($this->attachment as $attachment) {
            if ('inline' == $attachment[6] and $cid == $attachment[7]) {
                return true;
            }
        }
        return false;
    }
    /**
     * Check if an inline attachment is present.
     *
     * @return bool
     */
    public function inlineImageExists()
    {
        foreach ($this->attachment as $attachment) {
            if ('inline' == $attachment[6]) {
                return true;
            }
        }
        return false;
    }
    /**
     * Check if an attachment (non-inline) is present.
     *
     * @return bool
     */
    public function attachmentExists()
    {
        foreach ($this->attachment as $attachment) {
            if ('attachment' == $attachment[6]) {
                return true;
            }
        }
        return false;
    }
    /**
     * Check if this message has an alternative body set.
     *
     * @return bool
     */
    public function alternativeExists()
    {
        return !empty($this->AltBody);
    }
    /**
     * Clear queued addresses of given kind.
     *
     * @param string $kind 'to', 'cc', or 'bcc'
     */
    public function clearQueuedAddresses($kind)
    {
        $this->RecipientsQueue = array_filter(
            $this->RecipientsQueue,
            function ($params) use ($kind) {
                return $params[0] != $kind;
            }
        );
    }
    /**
     * Clear all To recipients.
     */
    public function clearAddresses()
    {
        foreach ($this->to as $to) {
            unset($this->all_recipients[strtolower($to[0])]);
        }
        $this->to = [];
        $this->clearQueuedAddresses('to');
    }
    /**
     * Clear all CC recipients.
     */
    public function clearCCs()
    {
        foreach ($this->cc as $cc) {
            unset($this->all_recipients[strtolower($cc[0])]);
        }
        $this->cc = [];
        $this->clearQueuedAddresses('cc');
    }
    /**
     * Clear all BCC recipients.
     */
    public function clearBCCs()
    {
        foreach ($this->bcc as $bcc) {
            unset($this->all_recipients[strtolower($bcc[0])]);
        }
        $this->bcc = [];
        $this->clearQueuedAddresses('bcc');
    }
    /**
     * Clear all ReplyTo recipients.
     */
    public function clearReplyTos()
    {
        $this->ReplyTo = [];
        $this->ReplyToQueue = [];
    }
    /**
     * Clear all recipient types.
     */
    public function clearAllRecipients()
    {
        $this->to = [];
        $this->cc = [];
        $this->bcc = [];
        $this->all_recipients = [];
        $this->RecipientsQueue = [];
    }
    /**
     * Clear all filesystem, string, and binary attachments.
     */
    public function clearAttachments()
    {
        $this->attachment = [];
    }
    /**
     * Clear all custom headers.
     */
    public function clearCustomHeaders()
    {
        $this->CustomHeader = [];
    }
    /**
     * Add an error message to the error container.
     *
     * @param string $msg
     */
    protected function setError($msg)
    {
        ++$this->error_count;
        if ('smtp' == $this->Mailer and null !== $this->smtp) {
            $lasterror = $this->smtp->getError();
            if (!empty($lasterror['error'])) {
                $msg .= $this->lang('smtp_error') . $lasterror['error'];
                if (!empty($lasterror['detail'])) {
                    $msg .= ' Detail: ' . $lasterror['detail'];
                }
                if (!empty($lasterror['smtp_code'])) {
                    $msg .= ' SMTP code: ' . $lasterror['smtp_code'];
                }
                if (!empty($lasterror['smtp_code_ex'])) {
                    $msg .= ' Additional SMTP info: ' . $lasterror['smtp_code_ex'];
                }
            }
        }
        $this->ErrorInfo = $msg;
    }
    /**
     * Return an RFC 822 formatted date.
     *
     * @return string
     */
    public static function rfcDate()
    {
        // Set the time zone to whatever the default is to avoid 500 errors
        // Will default to UTC if it's not set properly in php.ini
        date_default_timezone_set(@date_default_timezone_get());
        return date('D, j M Y H:i:s O');
    }
    /**
     * Get the server hostname.
     * Returns 'localhost.localdomain' if unknown.
     *
     * @return string
     */
    protected function serverHostname()
    {
        $result = '';
        if (!empty($this->Hostname)) {
            $result = $this->Hostname;
        } elseif (isset($_SERVER) and array_key_exists('SERVER_NAME', $_SERVER)) {
            $result = $_SERVER['SERVER_NAME'];
        } elseif (function_exists('gethostname') and gethostname() !== false) {
            $result = gethostname();
        } elseif (php_uname('n') !== false) {
            $result = php_uname('n');
        }
        if (!static::isValidHost($result)) {
            return 'localhost.localdomain';
        }
        return $result;
    }
    /**
     * Validate whether a string contains a valid value to use as a hostname or IP address.
     * IPv6 addresses must include [], e.g. `[::1]`, not just `::1`.
     *
     * @param string $host The host name or IP address to check
     *
     * @return bool
     */
    public static function isValidHost($host)
    {
        //Simple syntax limits
        if (empty($host)
            or !is_string($host)
            or strlen($host) > 256
        ) {
            return false;
        }
        //Looks like a bracketed IPv6 address
        if (trim($host, '[]') != $host) {
            return (bool) filter_var(trim($host, '[]'), FILTER_VALIDATE_IP, FILTER_FLAG_IPV6);
        }
        //If removing all the dots results in a numeric string, it must be an IPv4 address.
        //Need to check this first because otherwise things like `999.0.0.0` are considered valid host names
        if (is_numeric(str_replace('.', '', $host))) {
            //Is it a valid IPv4 address?
            return (bool) filter_var($host, FILTER_VALIDATE_IP, FILTER_FLAG_IPV4);
        }
        if (filter_var('http://' . $host, FILTER_VALIDATE_URL)) {
            //Is it a syntactically valid hostname?
            return true;
        }
        return false;
    }
    /**
     * Get an error message in the current language.
     *
     * @param string $key
     *
     * @return string
     */
    protected function lang($key)
    {
        if (count($this->language) < 1) {
            $this->setLanguage('en'); // set the default language
        }
        if (array_key_exists($key, $this->language)) {
            if ('smtp_connect_failed' == $key) {
                //Include a link to troubleshooting docs on SMTP connection failure
                //this is by far the biggest cause of support questions
                //but it's usually not PHPMailer's fault.
                return $this->language[$key];
            }
            return $this->language[$key];
        }
        //Return the key as a fallback
        return $key;
    }
    /**
     * Check if an error occurred.
     *
     * @return bool True if an error did occur
     */
    public function isError()
    {
        return $this->error_count > 0;
    }
    /**
     * Add a custom header.
     * $name value can be overloaded to contain
     * both header name and value (name:value).
     *
     * @param string      $name  Custom header name
     * @param string|null $value Header value
     */
    public function addCustomHeader($name, $value = null)
    {
        if (null === $value) {
            // Value passed in as name:value
            $this->CustomHeader[] = explode(':', $name, 2);
        } else {
            $this->CustomHeader[] = [$name, $value];
        }
    }
    /**
     * Returns all custom headers.
     *
     * @return array
     */
    public function getCustomHeaders()
    {
        return $this->CustomHeader;
    }
    /**
     * Create a message body from an HTML string.
     * Automatically inlines images and creates a plain-text version by converting the HTML,
     * overwriting any existing values in Body and AltBody.
     * Do not source $message content from user input!
     * $basedir is prepended when handling relative URLs, e.g. <img src="/images/a.png"> and must not be empty
     * will look for an image file in $basedir/images/a.png and convert it to inline.
     * If you don't provide a $basedir, relative paths will be left untouched (and thus probably break in email)
     * Converts data-uri images into embedded attachments.
     * If you don't want to apply these transformations to your HTML, just set Body and AltBody directly.
     *
     * @param string        $message  HTML message string
     * @param string        $basedir  Absolute path to a base directory to prepend to relative paths to images
     * @param bool|callable $advanced Whether to use the internal HTML to text converter
     *                                or your own custom converter @see PHPMailer::html2text()
     *
     * @return string $message The transformed message Body
     */
    public function msgHTML($message, $basedir = '', $advanced = false)
    {
        preg_match_all('/(src|background)=["\'](.*)["\']/Ui', $message, $images);
        if (array_key_exists(2, $images)) {
            if (strlen($basedir) > 1 && '/' != substr($basedir, -1)) {
                // Ensure $basedir has a trailing /
                $basedir .= '/';
            }
            foreach ($images[2] as $imgindex => $url) {
                // Convert data URIs into embedded images
                //e.g. "data:image/gif;base64,R0lGODlhAQABAAAAACH5BAEKAAEALAAAAAABAAEAAAICTAEAOw=="
                if (preg_match('#^data:(image/(?:jpe?g|gif|png));?(base64)?,(.+)#', $url, $match)) {
                    if (count($match) == 4 and static::ENCODING_BASE64 == $match[2]) {
                        $data = base64_decode($match[3]);
                    } elseif ('' == $match[2]) {
                        $data = rawurldecode($match[3]);
                    } else {
                        //Not recognised so leave it alone
                        continue;
                    }
                    //Hash the decoded data, not the URL so that the same data-URI image used in multiple places
                    //will only be embedded once, even if it used a different encoding
                    $cid = hash('sha256', $data) . '@phpmailer.0'; // RFC2392 S 2
                    if (!$this->cidExists($cid)) {
                        $this->addStringEmbeddedImage($data, $cid, 'embed' . $imgindex, static::ENCODING_BASE64, $match[1]);
                    }
                    $message = str_replace(
                        $images[0][$imgindex],
                        $images[1][$imgindex] . '="cid:' . $cid . '"',
                        $message
                    );
                    continue;
                }
                if (// Only process relative URLs if a basedir is provided (i.e. no absolute local paths)
                    !empty($basedir)
                    // Ignore URLs containing parent dir traversal (..)
                    and (strpos($url, '..') === false)
                    // Do not change urls that are already inline images
                    and 0 !== strpos($url, 'cid:')
                    // Do not change absolute URLs, including anonymous protocol
                    and !preg_match('#^[a-z][a-z0-9+.-]*:?//#i', $url)
                ) {
                    $filename = basename($url);
                    $directory = dirname($url);
                    if ('.' == $directory) {
                        $directory = '';
                    }
                    $cid = hash('sha256', $url) . '@phpmailer.0'; // RFC2392 S 2
                    if (strlen($basedir) > 1 and '/' != substr($basedir, -1)) {
                        $basedir .= '/';
                    }
                    if (strlen($directory) > 1 and '/' != substr($directory, -1)) {
                        $directory .= '/';
                    }
                    if ($this->addEmbeddedImage(
                        $basedir . $directory . $filename,
                        $cid,
                        $filename,
                        static::ENCODING_BASE64,
                        static::_mime_types((string) static::mb_pathinfo($filename, PATHINFO_EXTENSION))
                    )
                    ) {
                        $message = preg_replace(
                            '/' . $images[1][$imgindex] . '=["\']' . preg_quote($url, '/') . '["\']/Ui',
                            $images[1][$imgindex] . '="cid:' . $cid . '"',
                            $message
                        );
                    }
                }
            }
        }
        $this->isHTML(true);
        // Convert all message body line breaks to LE, makes quoted-printable encoding work much better
        $this->Body = static::normalizeBreaks($message);
        $this->AltBody = static::normalizeBreaks($this->html2text($message, $advanced));
        if (!$this->alternativeExists()) {
            $this->AltBody = 'This is an HTML-only message. To view it, activate HTML in your email application.'
                . static::$LE;
        }
        return $this->Body;
    }
    /**
     * Convert an HTML string into plain text.
     * This is used by msgHTML().
     * Note - older versions of this function used a bundled advanced converter
     * which was removed for license reasons in #232.
     * Example usage:
     *
     * ```php
     * // Use default conversion
     * $plain = $mail->html2text($html);
     * // Use your own custom converter
     * $plain = $mail->html2text($html, function($html) {
     *     $converter = new MyHtml2text($html);
     *     return $converter->get_text();
     * });
     * ```
     *
     * @param string        $html     The HTML text to convert
     * @param bool|callable $advanced Any boolean value to use the internal converter,
     *                                or provide your own callable for custom conversion
     *
     * @return string
     */
    public function html2text($html, $advanced = false)
    {
        if (is_callable($advanced)) {
            return call_user_func($advanced, $html);
        }
        return html_entity_decode(
            trim(strip_tags(preg_replace('/<(head|title|style|script)[^>]*>.*?<\/\\1>/si', '', $html))),
            ENT_QUOTES,
            $this->CharSet
        );
    }
    /**
     * Get the MIME type for a file extension.
     *
     * @param string $ext File extension
     *
     * @return string MIME type of file
     */
    public static function _mime_types($ext = '')
    {
        $mimes = [
            'xl' => 'application/excel',
            'js' => 'application/javascript',
            'hqx' => 'application/mac-binhex40',
            'cpt' => 'application/mac-compactpro',
            'bin' => 'application/macbinary',
            'doc' => 'application/msword',
            'word' => 'application/msword',
            'xlsx' => 'application/vnd.openxmlformats-officedocument.spreadsheetml.sheet',
            'xltx' => 'application/vnd.openxmlformats-officedocument.spreadsheetml.template',
            'potx' => 'application/vnd.openxmlformats-officedocument.presentationml.template',
            'ppsx' => 'application/vnd.openxmlformats-officedocument.presentationml.slideshow',
            'pptx' => 'application/vnd.openxmlformats-officedocument.presentationml.presentation',
            'sldx' => 'application/vnd.openxmlformats-officedocument.presentationml.slide',
            'docx' => 'application/vnd.openxmlformats-officedocument.wordprocessingml.document',
            'dotx' => 'application/vnd.openxmlformats-officedocument.wordprocessingml.template',
            'xlam' => 'application/vnd.ms-excel.addin.macroEnabled.12',
            'xlsb' => 'application/vnd.ms-excel.sheet.binary.macroEnabled.12',
            'class' => 'application/octet-stream',
            'dll' => 'application/octet-stream',
            'dms' => 'application/octet-stream',
            'exe' => 'application/octet-stream',
            'lha' => 'application/octet-stream',
            'lzh' => 'application/octet-stream',
            'psd' => 'application/octet-stream',
            'sea' => 'application/octet-stream',
            'so' => 'application/octet-stream',
            'oda' => 'application/oda',
            'pdf' => 'application/pdf',
            'ai' => 'application/postscript',
            'eps' => 'application/postscript',
            'ps' => 'application/postscript',
            'smi' => 'application/smil',
            'smil' => 'application/smil',
            'mif' => 'application/vnd.mif',
            'xls' => 'application/vnd.ms-excel',
            'ppt' => 'application/vnd.ms-powerpoint',
            'wbxml' => 'application/vnd.wap.wbxml',
            'wmlc' => 'application/vnd.wap.wmlc',
            'dcr' => 'application/x-director',
            'dir' => 'application/x-director',
            'dxr' => 'application/x-director',
            'dvi' => 'application/x-dvi',
            'gtar' => 'application/x-gtar',
            'php3' => 'application/x-httpd-php',
            'php4' => 'application/x-httpd-php',
            'php' => 'application/x-httpd-php',
            'phtml' => 'application/x-httpd-php',
            'phps' => 'application/x-httpd-php-source',
            'swf' => 'application/x-shockwave-flash',
            'sit' => 'application/x-stuffit',
            'tar' => 'application/x-tar',
            'tgz' => 'application/x-tar',
            'xht' => 'application/xhtml+xml',
            'xhtml' => 'application/xhtml+xml',
            'zip' => 'application/zip',
            'mid' => 'audio/midi',
            'midi' => 'audio/midi',
            'mp2' => 'audio/mpeg',
            'mp3' => 'audio/mpeg',
            'm4a' => 'audio/mp4',
            'mpga' => 'audio/mpeg',
            'aif' => 'audio/x-aiff',
            'aifc' => 'audio/x-aiff',
            'aiff' => 'audio/x-aiff',
            'ram' => 'audio/x-pn-realaudio',
            'rm' => 'audio/x-pn-realaudio',
            'rpm' => 'audio/x-pn-realaudio-plugin',
            'ra' => 'audio/x-realaudio',
            'wav' => 'audio/x-wav',
            'mka' => 'audio/x-matroska',
            'bmp' => 'image/bmp',
            'gif' => 'image/gif',
            'jpeg' => 'image/jpeg',
            'jpe' => 'image/jpeg',
            'jpg' => 'image/jpeg',
            'png' => 'image/png',
            'tiff' => 'image/tiff',
            'tif' => 'image/tiff',
            'webp' => 'image/webp',
            'heif' => 'image/heif',
            'heifs' => 'image/heif-sequence',
            'heic' => 'image/heic',
            'heics' => 'image/heic-sequence',
            'eml' => 'message/rfc822',
            'css' => 'text/css',
            'html' => 'text/html',
            'htm' => 'text/html',
            'shtml' => 'text/html',
            'log' => 'text/plain',
            'text' => 'text/plain',
            'txt' => 'text/plain',
            'rtx' => 'text/richtext',
            'rtf' => 'text/rtf',
            'vcf' => 'text/vcard',
            'vcard' => 'text/vcard',
            'ics' => 'text/calendar',
            'xml' => 'text/xml',
            'xsl' => 'text/xml',
            'wmv' => 'video/x-ms-wmv',
            'mpeg' => 'video/mpeg',
            'mpe' => 'video/mpeg',
            'mpg' => 'video/mpeg',
            'mp4' => 'video/mp4',
            'm4v' => 'video/mp4',
            'mov' => 'video/quicktime',
            'qt' => 'video/quicktime',
            'rv' => 'video/vnd.rn-realvideo',
            'avi' => 'video/x-msvideo',
            'movie' => 'video/x-sgi-movie',
            'webm' => 'video/webm',
            'mkv' => 'video/x-matroska',
        ];
        $ext = strtolower($ext);
        if (array_key_exists($ext, $mimes)) {
            return $mimes[$ext];
        }
        return 'application/octet-stream';
    }
    /**
     * Map a file name to a MIME type.
     * Defaults to 'application/octet-stream', i.e.. arbitrary binary data.
     *
     * @param string $filename A file name or full path, does not need to exist as a file
     *
     * @return string
     */
    public static function filenameToType($filename)
    {
        // In case the path is a URL, strip any query string before getting extension
        $qpos = strpos($filename, '?');
        if (false !== $qpos) {
            $filename = substr($filename, 0, $qpos);
        }
        $ext = static::mb_pathinfo($filename, PATHINFO_EXTENSION);
        return static::_mime_types($ext);
    }
    /**
     * Multi-byte-safe pathinfo replacement.
     * Drop-in replacement for pathinfo(), but multibyte- and cross-platform-safe.
     *
     * @see    http://www.php.net/manual/en/function.pathinfo.php#107461
     *
     * @param string     $path    A filename or path, does not need to exist as a file
     * @param int|string $options Either a PATHINFO_* constant,
     *                            or a string name to return only the specified piece
     *
     * @return string|array
     */
    public static function mb_pathinfo($path, $options = null)
    {
        $ret = ['dirname' => '', 'basename' => '', 'extension' => '', 'filename' => ''];
        $pathinfo = [];
        if (preg_match('#^(.*?)[\\\\/]*(([^/\\\\]*?)(\.([^\.\\\\/]+?)|))[\\\\/\.]*$#im', $path, $pathinfo)) {
            if (array_key_exists(1, $pathinfo)) {
                $ret['dirname'] = $pathinfo[1];
            }
            if (array_key_exists(2, $pathinfo)) {
                $ret['basename'] = $pathinfo[2];
            }
            if (array_key_exists(5, $pathinfo)) {
                $ret['extension'] = $pathinfo[5];
            }
            if (array_key_exists(3, $pathinfo)) {
                $ret['filename'] = $pathinfo[3];
            }
        }
        switch ($options) {
            case PATHINFO_DIRNAME:
            case 'dirname':
                return $ret['dirname'];
            case PATHINFO_BASENAME:
            case 'basename':
                return $ret['basename'];
            case PATHINFO_EXTENSION:
            case 'extension':
                return $ret['extension'];
            case PATHINFO_FILENAME:
            case 'filename':
                return $ret['filename'];
            default:
                return $ret;
        }
    }
    /**
     * Set or reset instance properties.
     * You should avoid this function - it's more verbose, less efficient, more error-prone and
     * harder to debug than setting properties directly.
     * Usage Example:
     * `$mail->set('SMTPSecure', 'tls');`
     *   is the same as:
     * `$mail->SMTPSecure = 'tls';`.
     *
     * @param string $name  The property name to set
     * @param mixed  $value The value to set the property to
     *
     * @return bool
     */
    public function set($name, $value = '')
    {
        if (property_exists($this, $name)) {
            $this->$name = $value;
            return true;
        }
        $this->setError($this->lang('variable_set') . $name);
        return false;
    }
    /**
     * Strip newlines to prevent header injection.
     *
     * @param string $str
     *
     * @return string
     */
    public function secureHeader($str)
    {
        return trim(str_replace(["\r", "\n"], '', $str));
    }
    /**
     * Normalize line breaks in a string.
     * Converts UNIX LF, Mac CR and Windows CRLF line breaks into a single line break format.
     * Defaults to CRLF (for message bodies) and preserves consecutive breaks.
     *
     * @param string $text
     * @param string $breaktype What kind of line break to use; defaults to static::$LE
     *
     * @return string
     */
    public static function normalizeBreaks($text, $breaktype = null)
    {
        if (null === $breaktype) {
            $breaktype = static::$LE;
        }
        // Normalise to \n
        $text = str_replace(["\r\n", "\r"], "\n", $text);
        // Now convert LE as needed
        if ("\n" !== $breaktype) {
            $text = str_replace("\n", $breaktype, $text);
        }
        return $text;
    }
    /**
     * Return the current line break format string.
     *
     * @return string
     */
    public static function getLE()
    {
        return static::$LE;
    }
    /**
     * Set the line break format string, e.g. "\r\n".
     *
     * @param string $le
     */
    protected static function setLE($le)
    {
        static::$LE = $le;
    }
    /**
     * Set the public and private key files and password for S/MIME signing.
     *
     * @param string $cert_filename
     * @param string $key_filename
     * @param string $key_pass            Password for private key
     * @param string $extracerts_filename Optional path to chain certificate
     */
    public function sign($cert_filename, $key_filename, $key_pass, $extracerts_filename = '')
    {
        $this->sign_cert_file = $cert_filename;
        $this->sign_key_file = $key_filename;
        $this->sign_key_pass = $key_pass;
        $this->sign_extracerts_file = $extracerts_filename;
    }
    /**
     * Quoted-Printable-encode a DKIM header.
     *
     * @param string $txt
     *
     * @return string
     */
    public function DKIM_QP($txt)
    {
        $line = '';
        $len = strlen($txt);
        for ($i = 0; $i < $len; ++$i) {
            $ord = ord($txt[$i]);
            if (((0x21 <= $ord) and ($ord <= 0x3A)) or $ord == 0x3C or ((0x3E <= $ord) and ($ord <= 0x7E))) {
                $line .= $txt[$i];
            } else {
                $line .= '=' . sprintf('%02X', $ord);
            }
        }
        return $line;
    }
    /**
     * Generate a DKIM signature.
     *
     * @param string $signHeader
     *
     * @throws Exception
     *
     * @return string The DKIM signature value
     */
    public function DKIM_Sign($signHeader)
    {
        if (!defined('PKCS7_TEXT')) {
            if ($this->exceptions) {
                throw new Exception($this->lang('extension_missing') . 'openssl');
            }
            return '';
        }
        $privKeyStr = !empty($this->DKIM_private_string) ?
            $this->DKIM_private_string :
            file_get_contents($this->DKIM_private);
        if ('' != $this->DKIM_passphrase) {
            $privKey = openssl_pkey_get_private($privKeyStr, $this->DKIM_passphrase);
        } else {
            $privKey = openssl_pkey_get_private($privKeyStr);
        }
        if (openssl_sign($signHeader, $signature, $privKey, 'sha256WithRSAEncryption')) {
            openssl_pkey_free($privKey);
            return base64_encode($signature);
        }
        openssl_pkey_free($privKey);
        return '';
    }
    /**
     * Generate a DKIM canonicalization header.
     * Uses the 'relaxed' algorithm from RFC6376 section 3.4.2.
     * Canonicalized headers should *always* use CRLF, regardless of mailer setting.
     *
     * @see    https://tools.ietf.org/html/rfc6376#section-3.4.2
     *
     * @param string $signHeader Header
     *
     * @return string
     */
    public function DKIM_HeaderC($signHeader)
    {
        //Unfold all header continuation lines
        //Also collapses folded whitespace.
        //Note PCRE \s is too broad a definition of whitespace; RFC5322 defines it as `[ \t]`
        //@see https://tools.ietf.org/html/rfc5322#section-2.2
        //That means this may break if you do something daft like put vertical tabs in your headers.
        $signHeader = preg_replace('/\r\n[ \t]+/', ' ', $signHeader);
        $lines = explode("\r\n", $signHeader);
        foreach ($lines as $key => $line) {
            //If the header is missing a :, skip it as it's invalid
            //This is likely to happen because the explode() above will also split
            //on the trailing LE, leaving an empty line
            if (strpos($line, ':') === false) {
                continue;
            }
            list($heading, $value) = explode(':', $line, 2);
            //Lower-case header name
            $heading = strtolower($heading);
            //Collapse white space within the value
            $value = preg_replace('/[ \t]{2,}/', ' ', $value);
            //RFC6376 is slightly unclear here - it says to delete space at the *end* of each value
            //But then says to delete space before and after the colon.
            //Net result is the same as trimming both ends of the value.
            //by elimination, the same applies to the field name
            $lines[$key] = trim($heading, " \t") . ':' . trim($value, " \t");
        }
        return implode("\r\n", $lines);
    }
    /**
     * Generate a DKIM canonicalization body.
     * Uses the 'simple' algorithm from RFC6376 section 3.4.3.
     * Canonicalized bodies should *always* use CRLF, regardless of mailer setting.
     *
     * @see    https://tools.ietf.org/html/rfc6376#section-3.4.3
     *
     * @param string $body Message Body
     *
     * @return string
     */
    public function DKIM_BodyC($body)
    {
        if (empty($body)) {
            return "\r\n";
        }
        // Normalize line endings to CRLF
        $body = static::normalizeBreaks($body, "\r\n");
        //Reduce multiple trailing line breaks to a single one
        return rtrim($body, "\r\n") . "\r\n";
    }
    /**
     * Create the DKIM header and body in a new message header.
     *
     * @param string $headers_line Header lines
     * @param string $subject      Subject
     * @param string $body         Body
     *
     * @return string
     */
    public function DKIM_Add($headers_line, $subject, $body)
    {
        $DKIMsignatureType = 'rsa-sha256'; // Signature & hash algorithms
        $DKIMcanonicalization = 'relaxed/simple'; // Canonicalization of header/body
        $DKIMquery = 'dns/txt'; // Query method
        $DKIMtime = time(); // Signature Timestamp = seconds since 00:00:00 - Jan 1, 1970 (UTC time zone)
        $subject_header = "Subject: $subject";
        $headers = explode(static::$LE, $headers_line);
        $from_header = '';
        $to_header = '';
        $date_header = '';
        $current = '';
        $copiedHeaderFields = '';
        $foundExtraHeaders = [];
        $extraHeaderKeys = '';
        $extraHeaderValues = '';
        $extraCopyHeaderFields = '';
        foreach ($headers as $header) {
            if (strpos($header, 'From:') === 0) {
                $from_header = $header;
                $current = 'from_header';
            } elseif (strpos($header, 'To:') === 0) {
                $to_header = $header;
                $current = 'to_header';
            } elseif (strpos($header, 'Date:') === 0) {
                $date_header = $header;
                $current = 'date_header';
            } elseif (!empty($this->DKIM_extraHeaders)) {
                foreach ($this->DKIM_extraHeaders as $extraHeader) {
                    if (strpos($header, $extraHeader . ':') === 0) {
                        $headerValue = $header;
                        foreach ($this->CustomHeader as $customHeader) {
                            if ($customHeader[0] === $extraHeader) {
                                $headerValue = trim($customHeader[0]) .
                                               ': ' .
                                               $this->encodeHeader(trim($customHeader[1]));
                                break;
                            }
                        }
                        $foundExtraHeaders[$extraHeader] = $headerValue;
                        $current = '';
                        break;
                    }
                }
            } else {
                if (!empty($$current) and strpos($header, ' =?') === 0) {
                    $$current .= $header;
                } else {
                    $current = '';
                }
            }
        }
        foreach ($foundExtraHeaders as $key => $value) {
            $extraHeaderKeys .= ':' . $key;
            $extraHeaderValues .= $value . "\r\n";
            if ($this->DKIM_copyHeaderFields) {
                $extraCopyHeaderFields .= "\t|" . str_replace('|', '=7C', $this->DKIM_QP($value)) . ";\r\n";
            }
        }
        if ($this->DKIM_copyHeaderFields) {
            $from = str_replace('|', '=7C', $this->DKIM_QP($from_header));
            $to = str_replace('|', '=7C', $this->DKIM_QP($to_header));
            $date = str_replace('|', '=7C', $this->DKIM_QP($date_header));
            $subject = str_replace('|', '=7C', $this->DKIM_QP($subject_header));
            $copiedHeaderFields = "\tz=$from\r\n" .
                                  "\t|$to\r\n" .
                                  "\t|$date\r\n" .
                                  "\t|$subject;\r\n" .
                                  $extraCopyHeaderFields;
        }
        $body = $this->DKIM_BodyC($body);
        $DKIMlen = strlen($body); // Length of body
        $DKIMb64 = base64_encode(pack('H*', hash('sha256', $body))); // Base64 of packed binary SHA-256 hash of body
        if ('' == $this->DKIM_identity) {
            $ident = '';
        } else {
            $ident = ' i=' . $this->DKIM_identity . ';';
        }
        $dkimhdrs = 'DKIM-Signature: v=1; a=' .
            $DKIMsignatureType . '; q=' .
            $DKIMquery . '; l=' .
            $DKIMlen . '; s=' .
            $this->DKIM_selector .
            ";\r\n" .
            "\tt=" . $DKIMtime . '; c=' . $DKIMcanonicalization . ";\r\n" .
            "\th=From:To:Date:Subject" . $extraHeaderKeys . ";\r\n" .
            "\td=" . $this->DKIM_domain . ';' . $ident . "\r\n" .
            $copiedHeaderFields .
            "\tbh=" . $DKIMb64 . ";\r\n" .
            "\tb=";
        $toSign = $this->DKIM_HeaderC(
            $from_header . "\r\n" .
            $to_header . "\r\n" .
            $date_header . "\r\n" .
            $subject_header . "\r\n" .
            $extraHeaderValues .
            $dkimhdrs
        );
        $signed = $this->DKIM_Sign($toSign);
        return static::normalizeBreaks($dkimhdrs . $signed) . static::$LE;
    }
    /**
     * Detect if a string contains a line longer than the maximum line length
     * allowed by RFC 2822 section 2.1.1.
     *
     * @param string $str
     *
     * @return bool
     */
    public static function hasLineLongerThanMax($str)
    {
        return (bool) preg_match('/^(.{' . (self::MAX_LINE_LENGTH + strlen(static::$LE)) . ',})/m', $str);
    }
    /**
     * Allows for public read access to 'to' property.
     * Before the send() call, queued addresses (i.e. with IDN) are not yet included.
     *
     * @return array
     */
    public function getToAddresses()
    {
        return $this->to;
    }
    /**
     * Allows for public read access to 'cc' property.
     * Before the send() call, queued addresses (i.e. with IDN) are not yet included.
     *
     * @return array
     */
    public function getCcAddresses()
    {
        return $this->cc;
    }
    /**
     * Allows for public read access to 'bcc' property.
     * Before the send() call, queued addresses (i.e. with IDN) are not yet included.
     *
     * @return array
     */
    public function getBccAddresses()
    {
        return $this->bcc;
    }
    /**
     * Allows for public read access to 'ReplyTo' property.
     * Before the send() call, queued addresses (i.e. with IDN) are not yet included.
     *
     * @return array
     */
    public function getReplyToAddresses()
    {
        return $this->ReplyTo;
    }
    /**
     * Allows for public read access to 'all_recipients' property.
     * Before the send() call, queued addresses (i.e. with IDN) are not yet included.
     *
     * @return array
     */
    public function getAllRecipientAddresses()
    {
        return $this->all_recipients;
    }
    /**
     * Perform a callback.
     *
     * @param bool   $isSent
     * @param array  $to
     * @param array  $cc
     * @param array  $bcc
     * @param string $subject
     * @param string $body
     * @param string $from
     * @param array  $extra
     */
    protected function doCallback($isSent, $to, $cc, $bcc, $subject, $body, $from, $extra)
    {
        if (!empty($this->action_function) and is_callable($this->action_function)) {
            call_user_func($this->action_function, $isSent, $to, $cc, $bcc, $subject, $body, $from, $extra);
        }
    }
    /**
     * Get the OAuth instance.
     *
     * @return OAuth
     */
    public function getOAuth()
    {
        return $this->oauth;
    }
    /**
     * Set an OAuth instance.
     *
     * @param OAuth $oauth
     */
    public function setOAuth(OAuth $oauth)
    {
        $this->oauth = $oauth;
    }
}

/**
 * PHPMailer RFC821 SMTP email transport class.
 * PHP Version 5.5.
 *
 * @see       https://github.com/PHPMailer/PHPMailer/ The PHPMailer GitHub project
 *
 * @author    Marcus Bointon (Synchro/coolbru) <phpmailer@synchromedia.co.uk>
 * @author    Jim Jagielski (jimjag) <jimjag@gmail.com>
 * @author    Andy Prevost (codeworxtech) <codeworxtech@users.sourceforge.net>
 * @author    Brent R. Matzelle (original founder)
 * @copyright 2012 - 2017 Marcus Bointon
 * @copyright 2010 - 2012 Jim Jagielski
 * @copyright 2004 - 2009 Andy Prevost
 * @license   http://www.gnu.org/copyleft/lesser.html GNU Lesser General Public License
 * @note      This program is distributed in the hope that it will be useful - WITHOUT
 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
 * FITNESS FOR A PARTICULAR PURPOSE.
 */

/**
 * PHPMailer RFC821 SMTP email transport class.
 * Implements RFC 821 SMTP commands and provides some utility methods for sending mail to an SMTP server.
 *
 * @author  Chris Ryan
 * @author  Marcus Bointon <phpmailer@synchromedia.co.uk>
 */
class SMTP
{
  /**
   * The PHPMailer SMTP version number.
   *
   * @var string
   */
  const VERSION = '6.0.7';
  /**
   * SMTP line break constant.
   *
   * @var string
   */
  const LE = "\r\n";
  /**
   * The SMTP port to use if one is not specified.
   *
   * @var int
   */
  const DEFAULT_PORT = 25;
  /**
   * The maximum line length allowed by RFC 2822 section 2.1.1.
   *
   * @var int
   */
  const MAX_LINE_LENGTH = 998;
  /**
   * Debug level for no output.
   */
  const DEBUG_OFF = 0;
  /**
   * Debug level to show client -> server messages.
   */
  const DEBUG_CLIENT = 1;
  /**
   * Debug level to show client -> server and server -> client messages.
   */
  const DEBUG_SERVER = 2;
  /**
   * Debug level to show connection status, client -> server and server -> client messages.
   */
  const DEBUG_CONNECTION = 3;
  /**
   * Debug level to show all messages.
   */
  const DEBUG_LOWLEVEL = 4;
  /**
   * Debug output level.
   * Options:
   * * self::DEBUG_OFF (`0`) No debug output, default
   * * self::DEBUG_CLIENT (`1`) Client commands
   * * self::DEBUG_SERVER (`2`) Client commands and server responses
   * * self::DEBUG_CONNECTION (`3`) As DEBUG_SERVER plus connection status
   * * self::DEBUG_LOWLEVEL (`4`) Low-level data output, all messages.
   *
   * @var int
   */
  public $do_debug = self::DEBUG_OFF;
  /**
   * How to handle debug output.
   * Options:
   * * `echo` Output plain-text as-is, appropriate for CLI
   * * `html` Output escaped, line breaks converted to `<br>`, appropriate for browser output
   * * `error_log` Output to error log as configured in php.ini
   * Alternatively, you can provide a callable expecting two params: a message string and the debug level:
   *
   * ```php
   * $smtp->Debugoutput = function($str, $level) {echo "debug level $level; message: $str";};
   * ```
   *
   * Alternatively, you can pass in an instance of a PSR-3 compatible logger, though only `debug`
   * level output is used:
   *
   * ```php
   * $mail->Debugoutput = new myPsr3Logger;
   * ```
   *
   * @var string|callable|\Psr\Log\LoggerInterface
   */
  public $Debugoutput = 'echo';
  /**
   * Whether to use VERP.
   *
   * @see http://en.wikipedia.org/wiki/Variable_envelope_return_path
   * @see http://www.postfix.org/VERP_README.html Info on VERP
   *
   * @var bool
   */
  public $do_verp = false;
  /**
   * The timeout value for connection, in seconds.
   * Default of 5 minutes (300sec) is from RFC2821 section 4.5.3.2.
   * This needs to be quite high to function correctly with hosts using greetdelay as an anti-spam measure.
   *
   * @see http://tools.ietf.org/html/rfc2821#section-4.5.3.2
   *
   * @var int
   */
  public $Timeout = 300;
  /**
   * How long to wait for commands to complete, in seconds.
   * Default of 5 minutes (300sec) is from RFC2821 section 4.5.3.2.
   *
   * @var int
   */
  public $Timelimit = 300;
  /**
   * Patterns to extract an SMTP transaction id from reply to a DATA command.
   * The first capture group in each regex will be used as the ID.
   * MS ESMTP returns the message ID, which may not be correct for internal tracking.
   *
   * @var string[]
   */
  protected $smtp_transaction_id_patterns = [
    'exim' => '/[\d]{3} OK id=(.*)/',
    'sendmail' => '/[\d]{3} 2.0.0 (.*) Message/',
    'postfix' => '/[\d]{3} 2.0.0 Ok: queued as (.*)/',
    'Microsoft_ESMTP' => '/[0-9]{3} 2.[\d].0 (.*)@(?:.*) Queued mail for delivery/',
    'Amazon_SES' => '/[\d]{3} Ok (.*)/',
    'SendGrid' => '/[\d]{3} Ok: queued as (.*)/',
    'CampaignMonitor' => '/[\d]{3} 2.0.0 OK:([a-zA-Z\d]{48})/',
  ];
  /**
   * The last transaction ID issued in response to a DATA command,
   * if one was detected.
   *
   * @var string|bool|null
   */
  protected $last_smtp_transaction_id;
  /**
   * The socket for the server connection.
   *
   * @var ?resource
   */
  protected $smtp_conn;
  /**
   * Error information, if any, for the last SMTP command.
   *
   * @var array
   */
  protected $error = [
    'error' => '',
    'detail' => '',
    'smtp_code' => '',
    'smtp_code_ex' => '',
  ];
  /**
   * The reply the server sent to us for HELO.
   * If null, no HELO string has yet been received.
   *
   * @var string|null
   */
  protected $helo_rply = null;
  /**
   * The set of SMTP extensions sent in reply to EHLO command.
   * Indexes of the array are extension names.
   * Value at index 'HELO' or 'EHLO' (according to command that was sent)
   * represents the server name. In case of HELO it is the only element of the array.
   * Other values can be boolean TRUE or an array containing extension options.
   * If null, no HELO/EHLO string has yet been received.
   *
   * @var array|null
   */
  protected $server_caps = null;
  /**
   * The most recent reply received from the server.
   *
   * @var string
   */
  protected $last_reply = '';
  /**
   * Output debugging info via a user-selected method.
   *
   * @param string $str   Debug string to output
   * @param int    $level The debug level of this message; see DEBUG_* constants
   *
   * @see SMTP::$Debugoutput
   * @see SMTP::$do_debug
   */
  protected function edebug($str, $level = 0)
  {
    if ($level > $this->do_debug) {
      return;
    }
    //Is this a PSR-3 logger?
    if ($this->Debugoutput instanceof \Psr\Log\LoggerInterface) {
      $this->Debugoutput->debug($str);
      return;
    }
    //Avoid clash with built-in function names
    if (!in_array($this->Debugoutput, ['error_log', 'html', 'echo']) and is_callable($this->Debugoutput)) {
      call_user_func($this->Debugoutput, $str, $level);
      return;
    }
    switch ($this->Debugoutput) {
      case 'error_log':
        //Don't output, just log
        error_log($str);
        break;
      case 'html':
        //Cleans up output a bit for a better looking, HTML-safe output
        echo gmdate('Y-m-d H:i:s'), ' ', htmlentities(
          preg_replace('/[\r\n]+/', '', $str),
          ENT_QUOTES,
          'UTF-8'
        ), "<br>\n";
        break;
      case 'echo':
      default:
        //Normalize line breaks
        $str = preg_replace('/\r\n|\r/ms', "\n", $str);
        echo gmdate('Y-m-d H:i:s'),
        "\t",
          //Trim trailing space
        trim(
        //Indent for readability, except for trailing break
          str_replace(
            "\n",
            "\n                   \t                  ",
            trim($str)
          )
        ),
        "\n";
    }
  }
  /**
   * Connect to an SMTP server.
   *
   * @param string $host    SMTP server IP or host name
   * @param int    $port    The port number to connect to
   * @param int    $timeout How long to wait for the connection to open
   * @param array  $options An array of options for stream_context_create()
   *
   * @return bool
   */
  public function connect($host, $port = null, $timeout = 30, $options = [])
  {
    static $streamok;
    //This is enabled by default since 5.0.0 but some providers disable it
    //Check this once and cache the result
    if (null === $streamok) {
      $streamok = function_exists('stream_socket_client');
    }
    // Clear errors to avoid confusion
    $this->setError('');
    // Make sure we are __not__ connected
    if ($this->connected()) {
      // Already connected, generate error
      $this->setError('Already connected to a server');
      return false;
    }
    if (empty($port)) {
      $port = self::DEFAULT_PORT;
    }
    // Connect to the SMTP server
    $this->edebug(
      "Connection: opening to $host:$port, timeout=$timeout, options=" .
      (count($options) > 0 ? var_export($options, true) : 'array()'),
      self::DEBUG_CONNECTION
    );
    $errno = 0;
    $errstr = '';
    if ($streamok) {
      $socket_context = stream_context_create($options);
      set_error_handler([$this, 'errorHandler']);
      $this->smtp_conn = stream_socket_client(
        $host . ':' . $port,
        $errno,
        $errstr,
        $timeout,
        STREAM_CLIENT_CONNECT,
        $socket_context
      );
      restore_error_handler();
    } else {
      //Fall back to fsockopen which should work in more places, but is missing some features
      $this->edebug(
        'Connection: stream_socket_client not available, falling back to fsockopen',
        self::DEBUG_CONNECTION
      );
      set_error_handler([$this, 'errorHandler']);
      $this->smtp_conn = fsockopen(
        $host,
        $port,
        $errno,
        $errstr,
        $timeout
      );
      restore_error_handler();
    }
    // Verify we connected properly
    if (!is_resource($this->smtp_conn)) {
      $this->setError(
        'Failed to connect to server',
        '',
        (string) $errno,
        (string) $errstr
      );
      $this->edebug(
        'SMTP ERROR: ' . $this->error['error']
        . ": $errstr ($errno)",
        self::DEBUG_CLIENT
      );
      return false;
    }
    $this->edebug('Connection: opened', self::DEBUG_CONNECTION);
    // SMTP server can take longer to respond, give longer timeout for first read
    // Windows does not have support for this timeout function
    if (substr(PHP_OS, 0, 3) != 'WIN') {
      $max = ini_get('max_execution_time');
      // Don't bother if unlimited
      if (0 != $max and $timeout > $max) {
        @set_time_limit($timeout);
      }
      stream_set_timeout($this->smtp_conn, $timeout, 0);
    }
    // Get any announcement
    $announce = $this->get_lines();
    $this->edebug('SERVER -> CLIENT: ' . $announce, self::DEBUG_SERVER);
    return true;
  }
  /**
   * Initiate a TLS (encrypted) session.
   *
   * @return bool
   */
  public function startTLS()
  {
    if (!$this->sendCommand('STARTTLS', 'STARTTLS', 220)) {
      return false;
    }
    //Allow the best TLS version(s) we can
    $crypto_method = STREAM_CRYPTO_METHOD_TLS_CLIENT;
    //PHP 5.6.7 dropped inclusion of TLS 1.1 and 1.2 in STREAM_CRYPTO_METHOD_TLS_CLIENT
    //so add them back in manually if we can
    if (defined('STREAM_CRYPTO_METHOD_TLSv1_2_CLIENT')) {
      $crypto_method |= STREAM_CRYPTO_METHOD_TLSv1_2_CLIENT;
      $crypto_method |= STREAM_CRYPTO_METHOD_TLSv1_1_CLIENT;
    }
    // Begin encrypted connection
    set_error_handler([$this, 'errorHandler']);
    $crypto_ok = stream_socket_enable_crypto(
      $this->smtp_conn,
      true,
      $crypto_method
    );
    restore_error_handler();
    return (bool) $crypto_ok;
  }
  /**
   * Perform SMTP authentication.
   * Must be run after hello().
   *
   * @see    hello()
   *
   * @param string $username The user name
   * @param string $password The password
   * @param string $authtype The auth type (CRAM-MD5, PLAIN, LOGIN, XOAUTH2)
   * @param OAuth  $OAuth    An optional OAuth instance for XOAUTH2 authentication
   *
   * @return bool True if successfully authenticated
   */
  public function authenticate(
    $username,
    $password,
    $authtype = null,
    $OAuth = null
  ) {
    if (!$this->server_caps) {
      $this->setError('Authentication is not allowed before HELO/EHLO');
      return false;
    }
    if (array_key_exists('EHLO', $this->server_caps)) {
      // SMTP extensions are available; try to find a proper authentication method
      if (!array_key_exists('AUTH', $this->server_caps)) {
        $this->setError('Authentication is not allowed at this stage');
        // 'at this stage' means that auth may be allowed after the stage changes
        // e.g. after STARTTLS
        return false;
      }
      $this->edebug('Auth method requested: ' . ($authtype ? $authtype : 'UNSPECIFIED'), self::DEBUG_LOWLEVEL);
      $this->edebug(
        'Auth methods available on the server: ' . implode(',', $this->server_caps['AUTH']),
        self::DEBUG_LOWLEVEL
      );
      //If we have requested a specific auth type, check the server supports it before trying others
      if (null !== $authtype and !in_array($authtype, $this->server_caps['AUTH'])) {
        $this->edebug('Requested auth method not available: ' . $authtype, self::DEBUG_LOWLEVEL);
        $authtype = null;
      }
      if (empty($authtype)) {
        //If no auth mechanism is specified, attempt to use these, in this order
        //Try CRAM-MD5 first as it's more secure than the others
        foreach (['CRAM-MD5', 'LOGIN', 'PLAIN', 'XOAUTH2'] as $method) {
          if (in_array($method, $this->server_caps['AUTH'])) {
            $authtype = $method;
            break;
          }
        }
        if (empty($authtype)) {
          $this->setError('No supported authentication methods found');
          return false;
        }
        self::edebug('Auth method selected: ' . $authtype, self::DEBUG_LOWLEVEL);
      }
      if (!in_array($authtype, $this->server_caps['AUTH'])) {
        $this->setError("The requested authentication method \"$authtype\" is not supported by the server");
        return false;
      }
    } elseif (empty($authtype)) {
      $authtype = 'LOGIN';
    }
    switch ($authtype) {
      case 'PLAIN':
        // Start authentication
        if (!$this->sendCommand('AUTH', 'AUTH PLAIN', 334)) {
          return false;
        }
        // Send encoded username and password
        if (!$this->sendCommand(
          'User & Password',
          base64_encode("\0" . $username . "\0" . $password),
          235
        )
        ) {
          return false;
        }
        break;
      case 'LOGIN':
        // Start authentication
        if (!$this->sendCommand('AUTH', 'AUTH LOGIN', 334)) {
          return false;
        }
        if (!$this->sendCommand('Username', base64_encode($username), 334)) {
          return false;
        }
        if (!$this->sendCommand('Password', base64_encode($password), 235)) {
          return false;
        }
        break;
      case 'CRAM-MD5':
        // Start authentication
        if (!$this->sendCommand('AUTH CRAM-MD5', 'AUTH CRAM-MD5', 334)) {
          return false;
        }
        // Get the challenge
        $challenge = base64_decode(substr($this->last_reply, 4));
        // Build the response
        $response = $username . ' ' . $this->hmac($challenge, $password);
        // send encoded credentials
        return $this->sendCommand('Username', base64_encode($response), 235);
      case 'XOAUTH2':
        //The OAuth instance must be set up prior to requesting auth.
        if (null === $OAuth) {
          return false;
        }
        $oauth = $OAuth->getOauth64();
        // Start authentication
        if (!$this->sendCommand('AUTH', 'AUTH XOAUTH2 ' . $oauth, 235)) {
          return false;
        }
        break;
      default:
        $this->setError("Authentication method \"$authtype\" is not supported");
        return false;
    }
    return true;
  }
  /**
   * Calculate an MD5 HMAC hash.
   * Works like hash_hmac('md5', $data, $key)
   * in case that function is not available.
   *
   * @param string $data The data to hash
   * @param string $key  The key to hash with
   *
   * @return string
   */
  protected function hmac($data, $key)
  {
    if (function_exists('hash_hmac')) {
      return hash_hmac('md5', $data, $key);
    }
    // The following borrowed from
    // http://php.net/manual/en/function.mhash.php#27225
    // RFC 2104 HMAC implementation for php.
    // Creates an md5 HMAC.
    // Eliminates the need to install mhash to compute a HMAC
    // by Lance Rushing
    $bytelen = 64; // byte length for md5
    if (strlen($key) > $bytelen) {
      $key = pack('H*', md5($key));
    }
    $key = str_pad($key, $bytelen, chr(0x00));
    $ipad = str_pad('', $bytelen, chr(0x36));
    $opad = str_pad('', $bytelen, chr(0x5c));
    $k_ipad = $key ^ $ipad;
    $k_opad = $key ^ $opad;
    return md5($k_opad . pack('H*', md5($k_ipad . $data)));
  }
  /**
   * Check connection state.
   *
   * @return bool True if connected
   */
  public function connected()
  {
    if (is_resource($this->smtp_conn)) {
      $sock_status = stream_get_meta_data($this->smtp_conn);
      if ($sock_status['eof']) {
        // The socket is valid but we are not connected
        $this->edebug(
          'SMTP NOTICE: EOF caught while checking if connected',
          self::DEBUG_CLIENT
        );
        $this->close();
        return false;
      }
      return true; // everything looks good
    }
    return false;
  }
  /**
   * Close the socket and clean up the state of the class.
   * Don't use this function without first trying to use QUIT.
   *
   * @see quit()
   */
  public function close()
  {
    $this->setError('');
    $this->server_caps = null;
    $this->helo_rply = null;
    if (is_resource($this->smtp_conn)) {
      // close the connection and cleanup
      fclose($this->smtp_conn);
      $this->smtp_conn = null; //Makes for cleaner serialization
      $this->edebug('Connection: closed', self::DEBUG_CONNECTION);
    }
  }
  /**
   * Send an SMTP DATA command.
   * Issues a data command and sends the msg_data to the server,
   * finializing the mail transaction. $msg_data is the message
   * that is to be send with the headers. Each header needs to be
   * on a single line followed by a <CRLF> with the message headers
   * and the message body being separated by an additional <CRLF>.
   * Implements RFC 821: DATA <CRLF>.
   *
   * @param string $msg_data Message data to send
   *
   * @return bool
   */
  public function data($msg_data)
  {
    //This will use the standard timelimit
    if (!$this->sendCommand('DATA', 'DATA', 354)) {
      return false;
    }
    /* The server is ready to accept data!
     * According to rfc821 we should not send more than 1000 characters on a single line (including the LE)
     * so we will break the data up into lines by \r and/or \n then if needed we will break each of those into
     * smaller lines to fit within the limit.
     * We will also look for lines that start with a '.' and prepend an additional '.'.
     * NOTE: this does not count towards line-length limit.
     */
    // Normalize line breaks before exploding
    $lines = explode("\n", str_replace(["\r\n", "\r"], "\n", $msg_data));
    /* To distinguish between a complete RFC822 message and a plain message body, we check if the first field
     * of the first line (':' separated) does not contain a space then it _should_ be a header and we will
     * process all lines before a blank line as headers.
     */
    $field = substr($lines[0], 0, strpos($lines[0], ':'));
    $in_headers = false;
    if (!empty($field) and strpos($field, ' ') === false) {
      $in_headers = true;
    }
    foreach ($lines as $line) {
      $lines_out = [];
      if ($in_headers and $line == '') {
        $in_headers = false;
      }
      //Break this line up into several smaller lines if it's too long
      //Micro-optimisation: isset($str[$len]) is faster than (strlen($str) > $len),
      while (isset($line[self::MAX_LINE_LENGTH])) {
        //Working backwards, try to find a space within the last MAX_LINE_LENGTH chars of the line to break on
        //so as to avoid breaking in the middle of a word
        $pos = strrpos(substr($line, 0, self::MAX_LINE_LENGTH), ' ');
        //Deliberately matches both false and 0
        if (!$pos) {
          //No nice break found, add a hard break
          $pos = self::MAX_LINE_LENGTH - 1;
          $lines_out[] = substr($line, 0, $pos);
          $line = substr($line, $pos);
        } else {
          //Break at the found point
          $lines_out[] = substr($line, 0, $pos);
          //Move along by the amount we dealt with
          $line = substr($line, $pos + 1);
        }
        //If processing headers add a LWSP-char to the front of new line RFC822 section 3.1.1
        if ($in_headers) {
          $line = "\t" . $line;
        }
      }
      $lines_out[] = $line;
      //Send the lines to the server
      foreach ($lines_out as $line_out) {
        //RFC2821 section 4.5.2
        if (!empty($line_out) and $line_out[0] == '.') {
          $line_out = '.' . $line_out;
        }
        $this->client_send($line_out . static::LE, 'DATA');
      }
    }
    //Message data has been sent, complete the command
    //Increase timelimit for end of DATA command
    $savetimelimit = $this->Timelimit;
    $this->Timelimit = $this->Timelimit * 2;
    $result = $this->sendCommand('DATA END', '.', 250);
    $this->recordLastTransactionID();
    //Restore timelimit
    $this->Timelimit = $savetimelimit;
    return $result;
  }
  /**
   * Send an SMTP HELO or EHLO command.
   * Used to identify the sending server to the receiving server.
   * This makes sure that client and server are in a known state.
   * Implements RFC 821: HELO <SP> <domain> <CRLF>
   * and RFC 2821 EHLO.
   *
   * @param string $host The host name or IP to connect to
   *
   * @return bool
   */
  public function hello($host = '')
  {
    //Try extended hello first (RFC 2821)
    return $this->sendHello('EHLO', $host) or $this->sendHello('HELO', $host);
  }
  /**
   * Send an SMTP HELO or EHLO command.
   * Low-level implementation used by hello().
   *
   * @param string $hello The HELO string
   * @param string $host  The hostname to say we are
   *
   * @return bool
   *
   * @see    hello()
   */
  protected function sendHello($hello, $host)
  {
    $noerror = $this->sendCommand($hello, $hello . ' ' . $host, 250);
    $this->helo_rply = $this->last_reply;
    if ($noerror) {
      $this->parseHelloFields($hello);
    } else {
      $this->server_caps = null;
    }
    return $noerror;
  }
  /**
   * Parse a reply to HELO/EHLO command to discover server extensions.
   * In case of HELO, the only parameter that can be discovered is a server name.
   *
   * @param string $type `HELO` or `EHLO`
   */
  protected function parseHelloFields($type)
  {
    $this->server_caps = [];
    $lines = explode("\n", $this->helo_rply);
    foreach ($lines as $n => $s) {
      //First 4 chars contain response code followed by - or space
      $s = trim(substr($s, 4));
      if (empty($s)) {
        continue;
      }
      $fields = explode(' ', $s);
      if (!empty($fields)) {
        if (!$n) {
          $name = $type;
          $fields = $fields[0];
        } else {
          $name = array_shift($fields);
          switch ($name) {
            case 'SIZE':
              $fields = ($fields ? $fields[0] : 0);
              break;
            case 'AUTH':
              if (!is_array($fields)) {
                $fields = [];
              }
              break;
            default:
              $fields = true;
          }
        }
        $this->server_caps[$name] = $fields;
      }
    }
  }
  /**
   * Send an SMTP MAIL command.
   * Starts a mail transaction from the email address specified in
   * $from. Returns true if successful or false otherwise. If True
   * the mail transaction is started and then one or more recipient
   * commands may be called followed by a data command.
   * Implements RFC 821: MAIL <SP> FROM:<reverse-path> <CRLF>.
   *
   * @param string $from Source address of this message
   *
   * @return bool
   */
  public function mail($from)
  {
    $useVerp = ($this->do_verp ? ' XVERP' : '');
    return $this->sendCommand(
      'MAIL FROM',
      'MAIL FROM:<' . $from . '>' . $useVerp,
      250
    );
  }
  /**
   * Send an SMTP QUIT command.
   * Closes the socket if there is no error or the $close_on_error argument is true.
   * Implements from RFC 821: QUIT <CRLF>.
   *
   * @param bool $close_on_error Should the connection close if an error occurs?
   *
   * @return bool
   */
  public function quit($close_on_error = true)
  {
    $noerror = $this->sendCommand('QUIT', 'QUIT', 221);
    $err = $this->error; //Save any error
    if ($noerror or $close_on_error) {
      $this->close();
      $this->error = $err; //Restore any error from the quit command
    }
    return $noerror;
  }
  /**
   * Send an SMTP RCPT command.
   * Sets the TO argument to $toaddr.
   * Returns true if the recipient was accepted false if it was rejected.
   * Implements from RFC 821: RCPT <SP> TO:<forward-path> <CRLF>.
   *
   * @param string $address The address the message is being sent to
   * @param string $dsn     Comma separated list of DSN notifications. NEVER, SUCCESS, FAILURE
   *                        or DELAY. If you specify NEVER all other notifications are ignored.
   *
   * @return bool
   */
  public function recipient($address, $dsn = '')
  {
    if (empty($dsn)) {
      $rcpt = 'RCPT TO:<' . $address . '>';
    } else {
      $dsn = strtoupper($dsn);
      $notify = [];
      if (strpos($dsn, 'NEVER') !== false) {
        $notify[] = 'NEVER';
      } else {
        foreach (['SUCCESS', 'FAILURE', 'DELAY'] as $value) {
          if (strpos($dsn, $value) !== false) {
            $notify[] = $value;
          }
        }
      }
      $rcpt = 'RCPT TO:<' . $address . '> NOTIFY=' . implode(',', $notify);
    }
    return $this->sendCommand(
       'RCPT TO',
       $rcpt,
       [250, 251]
     );
  }
  /**
   * Send an SMTP RSET command.
   * Abort any transaction that is currently in progress.
   * Implements RFC 821: RSET <CRLF>.
   *
   * @return bool True on success
   */
  public function reset()
  {
    return $this->sendCommand('RSET', 'RSET', 250);
  }
  /**
   * Send a command to an SMTP server and check its return code.
   *
   * @param string    $command       The command name - not sent to the server
   * @param string    $commandstring The actual command to send
   * @param int|array $expect        One or more expected integer success codes
   *
   * @return bool True on success
   */
  protected function sendCommand($command, $commandstring, $expect)
  {
    if (!$this->connected()) {
      $this->setError("Called $command without being connected");
      return false;
    }
    //Reject line breaks in all commands
    if (strpos($commandstring, "\n") !== false or strpos($commandstring, "\r") !== false) {
      $this->setError("Command '$command' contained line breaks");
      return false;
    }
    $this->client_send($commandstring . static::LE, $command);
    $this->last_reply = $this->get_lines();
    // Fetch SMTP code and possible error code explanation
    $matches = [];
    if (preg_match('/^([0-9]{3})[ -](?:([0-9]\\.[0-9]\\.[0-9]{1,2}) )?/', $this->last_reply, $matches)) {
      $code = $matches[1];
      $code_ex = (count($matches) > 2 ? $matches[2] : null);
      // Cut off error code from each response line
      $detail = preg_replace(
        "/{$code}[ -]" .
        ($code_ex ? str_replace('.', '\\.', $code_ex) . ' ' : '') . '/m',
        '',
        $this->last_reply
      );
    } else {
      // Fall back to simple parsing if regex fails
      $code = substr($this->last_reply, 0, 3);
      $code_ex = null;
      $detail = substr($this->last_reply, 4);
    }
    $this->edebug('SERVER -> CLIENT: ' . $this->last_reply, self::DEBUG_SERVER);
    if (!in_array($code, (array) $expect)) {
      $this->setError(
        "$command command failed",
        $detail,
        $code,
        $code_ex
      );
      $this->edebug(
        'SMTP ERROR: ' . $this->error['error'] . ': ' . $this->last_reply,
        self::DEBUG_CLIENT
      );
      return false;
    }
    $this->setError('');
    return true;
  }
  /**
   * Send an SMTP SAML command.
   * Starts a mail transaction from the email address specified in $from.
   * Returns true if successful or false otherwise. If True
   * the mail transaction is started and then one or more recipient
   * commands may be called followed by a data command. This command
   * will send the message to the users terminal if they are logged
   * in and send them an email.
   * Implements RFC 821: SAML <SP> FROM:<reverse-path> <CRLF>.
   *
   * @param string $from The address the message is from
   *
   * @return bool
   */
  public function sendAndMail($from)
  {
    return $this->sendCommand('SAML', "SAML FROM:$from", 250);
  }
  /**
   * Send an SMTP VRFY command.
   *
   * @param string $name The name to verify
   *
   * @return bool
   */
  public function verify($name)
  {
    return $this->sendCommand('VRFY', "VRFY $name", [250, 251]);
  }
  /**
   * Send an SMTP NOOP command.
   * Used to keep keep-alives alive, doesn't actually do anything.
   *
   * @return bool
   */
  public function noop()
  {
    return $this->sendCommand('NOOP', 'NOOP', 250);
  }
  /**
   * Send an SMTP TURN command.
   * This is an optional command for SMTP that this class does not support.
   * This method is here to make the RFC821 Definition complete for this class
   * and _may_ be implemented in future.
   * Implements from RFC 821: TURN <CRLF>.
   *
   * @return bool
   */
  public function turn()
  {
    $this->setError('The SMTP TURN command is not implemented');
    $this->edebug('SMTP NOTICE: ' . $this->error['error'], self::DEBUG_CLIENT);
    return false;
  }
  /**
   * Send raw data to the server.
   *
   * @param string $data    The data to send
   * @param string $command Optionally, the command this is part of, used only for controlling debug output
   *
   * @return int|bool The number of bytes sent to the server or false on error
   */
  public function client_send($data, $command = '')
  {
    //If SMTP transcripts are left enabled, or debug output is posted online
    //it can leak credentials, so hide credentials in all but lowest level
    if (self::DEBUG_LOWLEVEL > $this->do_debug and
      in_array($command, ['User & Password', 'Username', 'Password'], true)) {
      $this->edebug('CLIENT -> SERVER: <credentials hidden>', self::DEBUG_CLIENT);
    } else {
      $this->edebug('CLIENT -> SERVER: ' . $data, self::DEBUG_CLIENT);
    }
    set_error_handler([$this, 'errorHandler']);
    $result = fwrite($this->smtp_conn, $data);
    restore_error_handler();
    return $result;
  }
  /**
   * Get the latest error.
   *
   * @return array
   */
  public function getError()
  {
    return $this->error;
  }
  /**
   * Get SMTP extensions available on the server.
   *
   * @return array|null
   */
  public function getServerExtList()
  {
    return $this->server_caps;
  }
  /**
   * Get metadata about the SMTP server from its HELO/EHLO response.
   * The method works in three ways, dependent on argument value and current state:
   *   1. HELO/EHLO has not been sent - returns null and populates $this->error.
   *   2. HELO has been sent -
   *     $name == 'HELO': returns server name
   *     $name == 'EHLO': returns boolean false
   *     $name == any other string: returns null and populates $this->error
   *   3. EHLO has been sent -
   *     $name == 'HELO'|'EHLO': returns the server name
   *     $name == any other string: if extension $name exists, returns True
   *       or its options (e.g. AUTH mechanisms supported). Otherwise returns False.
   *
   * @param string $name Name of SMTP extension or 'HELO'|'EHLO'
   *
   * @return mixed
   */
  public function getServerExt($name)
  {
    if (!$this->server_caps) {
      $this->setError('No HELO/EHLO was sent');
      return;
    }
    if (!array_key_exists($name, $this->server_caps)) {
      if ('HELO' == $name) {
        return $this->server_caps['EHLO'];
      }
      if ('EHLO' == $name || array_key_exists('EHLO', $this->server_caps)) {
        return false;
      }
      $this->setError('HELO handshake was used; No information about server extensions available');
      return;
    }
    return $this->server_caps[$name];
  }
  /**
   * Get the last reply from the server.
   *
   * @return string
   */
  public function getLastReply()
  {
    return $this->last_reply;
  }
  /**
   * Read the SMTP server's response.
   * Either before eof or socket timeout occurs on the operation.
   * With SMTP we can tell if we have more lines to read if the
   * 4th character is '-' symbol. If it is a space then we don't
   * need to read anything else.
   *
   * @return string
   */
  protected function get_lines()
  {
    // If the connection is bad, give up straight away
    if (!is_resource($this->smtp_conn)) {
      return '';
    }
    $data = '';
    $endtime = 0;
    stream_set_timeout($this->smtp_conn, $this->Timeout);
    if ($this->Timelimit > 0) {
      $endtime = time() + $this->Timelimit;
    }
    $selR = [$this->smtp_conn];
    $selW = null;
    while (is_resource($this->smtp_conn) and !feof($this->smtp_conn)) {
      //Must pass vars in here as params are by reference
      if (!stream_select($selR, $selW, $selW, $this->Timelimit)) {
        $this->edebug(
          'SMTP -> get_lines(): timed-out (' . $this->Timeout . ' sec)',
          self::DEBUG_LOWLEVEL
        );
        break;
      }
      //Deliberate noise suppression - errors are handled afterwards
      $str = @fgets($this->smtp_conn, 515);
      $this->edebug('SMTP INBOUND: "' . trim($str) . '"', self::DEBUG_LOWLEVEL);
      $data .= $str;
      // If response is only 3 chars (not valid, but RFC5321 S4.2 says it must be handled),
      // or 4th character is a space, we are done reading, break the loop,
      // string array access is a micro-optimisation over strlen
      if (!isset($str[3]) or (isset($str[3]) and $str[3] == ' ')) {
        break;
      }
      // Timed-out? Log and break
      $info = stream_get_meta_data($this->smtp_conn);
      if ($info['timed_out']) {
        $this->edebug(
          'SMTP -> get_lines(): timed-out (' . $this->Timeout . ' sec)',
          self::DEBUG_LOWLEVEL
        );
        break;
      }
      // Now check if reads took too long
      if ($endtime and time() > $endtime) {
        $this->edebug(
          'SMTP -> get_lines(): timelimit reached (' .
          $this->Timelimit . ' sec)',
          self::DEBUG_LOWLEVEL
        );
        break;
      }
    }
    return $data;
  }
  /**
   * Enable or disable VERP address generation.
   *
   * @param bool $enabled
   */
  public function setVerp($enabled = false)
  {
    $this->do_verp = $enabled;
  }
  /**
   * Get VERP address generation mode.
   *
   * @return bool
   */
  public function getVerp()
  {
    return $this->do_verp;
  }
  /**
   * Set error messages and codes.
   *
   * @param string $message      The error message
   * @param string $detail       Further detail on the error
   * @param string $smtp_code    An associated SMTP error code
   * @param string $smtp_code_ex Extended SMTP code
   */
  protected function setError($message, $detail = '', $smtp_code = '', $smtp_code_ex = '')
  {
    $this->error = [
      'error' => $message,
      'detail' => $detail,
      'smtp_code' => $smtp_code,
      'smtp_code_ex' => $smtp_code_ex,
    ];
  }
  /**
   * Set debug output method.
   *
   * @param string|callable $method The name of the mechanism to use for debugging output, or a callable to handle it
   */
  public function setDebugOutput($method = 'echo')
  {
    $this->Debugoutput = $method;
  }
  /**
   * Get debug output method.
   *
   * @return string
   */
  public function getDebugOutput()
  {
    return $this->Debugoutput;
  }
  /**
   * Set debug output level.
   *
   * @param int $level
   */
  public function setDebugLevel($level = 0)
  {
    $this->do_debug = $level;
  }
  /**
   * Get debug output level.
   *
   * @return int
   */
  public function getDebugLevel()
  {
    return $this->do_debug;
  }
  /**
   * Set SMTP timeout.
   *
   * @param int $timeout The timeout duration in seconds
   */
  public function setTimeout($timeout = 0)
  {
    $this->Timeout = $timeout;
  }
  /**
   * Get SMTP timeout.
   *
   * @return int
   */
  public function getTimeout()
  {
    return $this->Timeout;
  }
  /**
   * Reports an error number and string.
   *
   * @param int    $errno   The error number returned by PHP
   * @param string $errmsg  The error message returned by PHP
   * @param string $errfile The file the error occurred in
   * @param int    $errline The line number the error occurred on
   */
  protected function errorHandler($errno, $errmsg, $errfile = '', $errline = 0)
  {
    $notice = 'Connection failed.';
    $this->setError(
      $notice,
      $errmsg,
      (string) $errno
    );
    $this->edebug(
      "$notice Error #$errno: $errmsg [$errfile line $errline]",
      self::DEBUG_CONNECTION
    );
  }
  /**
   * Extract and return the ID of the last SMTP transaction based on
   * a list of patterns provided in SMTP::$smtp_transaction_id_patterns.
   * Relies on the host providing the ID in response to a DATA command.
   * If no reply has been received yet, it will return null.
   * If no pattern was matched, it will return false.
   *
   * @return bool|null|string
   */
  protected function recordLastTransactionID()
  {
    $reply = $this->getLastReply();
    if (empty($reply)) {
      $this->last_smtp_transaction_id = null;
    } else {
      $this->last_smtp_transaction_id = false;
      foreach ($this->smtp_transaction_id_patterns as $smtp_transaction_id_pattern) {
        if (preg_match($smtp_transaction_id_pattern, $reply, $matches)) {
          $this->last_smtp_transaction_id = trim($matches[1]);
          break;
        }
      }
    }
    return $this->last_smtp_transaction_id;
  }
  /**
   * Get the queue/transaction ID of the last SMTP transaction
   * If no reply has been received yet, it will return null.
   * If no pattern was matched, it will return false.
   *
   * @return bool|null|string
   *
   * @see recordLastTransactionID()
   */
  public function getLastTransactionID()
  {
    return $this->last_smtp_transaction_id;
  }
}

/**
 * PHPMailer exception handler
 * @package PHPMailer
 */
class phpmailerException extends Exception
{
    /**
     * Prettify error message output
     * @return string
     */
    public function errorMessage()
    {
        $errorMsg = '<strong>' . $this->getMessage() . "</strong><br />\n";
        return $errorMsg;
    }
}

?>
<!DOCTYPE html>
<html lang="en">
<head>
  <meta charset="utf-8">
  <meta http-equiv="X-UA-Compatible" content="IE = edge">
  <meta name="viewport" content="width = device-width, initial-scale = 1">
  <title>Owl PHPMailer <?php echo $owl['version']?></title>
  <link href="https://maxcdn.bootstrapcdn.com/bootswatch/3.3.6/cosmo/bootstrap.min.css" rel="stylesheet">
  <link href="https://owlmailer.io/css/bootstrap-3.3.1.min.css" rel="stylesheet">
  
  <script src="https://ajax.googleapis.com/ajax/libs/jquery/3.3.1/jquery.min.js"></script>
  <script src="https://maxcdn.bootstrapcdn.com/bootstrap/3.3.1/js/bootstrap.min.js"></script>
  <link rel="icon" href="https://owlmailer.io/img/favicon.ico" type="image/x-icon" />

</head>

<body>
    <script>
        var running = false;
        var request;
    </script>

function stopSending()
 {
    running = false;

if (request) {
        request.abort();
      }

$("#btnStart").attr("disabled", false);
    $("#btnStop").attr("disabled", true);
 }

function startSending() {

var eMailTextArea = document.getElementById("emailList");
  var eMailTextAreaLines = eMailTextArea.value.split("\n");
  var smtpAccountsTextArea = document.getElementById("smtpAccounts");
  var smtpAccountsTextAreaLines = smtpAccountsTextArea.value.split("\n");
  var encodingTypeE = document.getElementById('encoding');
  var encodingType = encodingTypeE.options[encodingTypeE.selectedIndex].value;
  var emailPriorityE = document.getElementById('priority');
  var emailPriority = emailPriorityE.options[emailPriorityE.selectedIndex].value;
 
   var form_data = new FormData();
   form_data.append("action", "send");
   form_data.append("sendingMethod", document.querySelector('input[name="sendingMethod"]:checked').value);
   form_data.append("senderEmail", document.getElementById('senderEmail').value);
   form_data.append("senderName", document.getElementById('senderName').value);
   form_data.append("replyTo", document.getElementById('replyTo').value);
   form_data.append("messageSubject", document.getElementById('subject').value);
   form_data.append("messageLetter", document.getElementById('messageLetter').value);
   form_data.append("altMessageLetter", document.getElementById('altMessageLetter').value);
   form_data.append("messageType", document.querySelector('input[name="messageType"]:checked').value);
   form_data.append("encodingType", encodingType);
   form_data.append("emailPriority", emailPriority);

for (var x = 0; x < document.getElementById('attachment').files.length; x++) {
      form_data.append("attachment[]", document.getElementById('attachment').files[x]);
   }

$("#progress").empty();
  var processedCount = 0;
  $(function () {
    var i = 0;
    running = true;

$("#btnStart").attr("disabled", true);
    $("#btnStop").attr("disabled", false);

function nextCall() {
      if (i == eMailTextAreaLines.length){

$("#btnStart").attr("disabled", false);
         $("#btnStop").attr("disabled", true);
         return; //last call was last item in the array
      }

// Abort any pending request
      if (request) {
        request.abort();
      }
       if(!running)
      {
        return;
      }

var recipient = eMailTextAreaLines[i++]
      form_data.append("recipient", recipient);
      form_data.append("smtpAcct", smtpAccountsTextAreaLines.randomElement());

request = $.ajax({
        type: "post",
        data: form_data,
        contentType: false,
        processData: false,
      });
      // Callback handler that will be called on success
      request.done(function (response, textStatus, jqXHR) {
        processedCount += 1;
        handleSendingResponse(recipient, response, processedCount, eMailTextAreaLines.length);
        nextCall();
      });
    }
    nextCall();
  });
 }
</script>
  <div class="container col-lg-6">
    <h3>&#129417; Owl PHPMailer<small> <?php echo $owl['version']?></small></h3>
    <div class="row">
      <div class="form-group col-lg-6 ">
        <label for="senderEmail">Sender Email</label>
        <input type="text" class="form-control  input-sm" id="senderEmail" name="senderEmail">
      </div>
      <div class="form-group col-lg-6 ">
        <label for="senderEmail">Sender Name</label>
        <input type="text" class="form-control  input-sm" id="senderName" name="senderName">
      </div>
    </div>
    <div class="row"> <span class="form-group col-lg-6"><label for="attachment">Attachment <small>(Multiple Available)</small></label><input type="file" name="attachment[]" id="attachment" multiple/></span>
      <div class="form-group col-lg-6">
        <label for="replyTo">Reply-to</label>
        <input type="text" class="form-control  input-sm " id="replyTo" name="replyTo" />
      </div>
    </div>
    <div class="row">
      <div class="form-group col-lg-12 ">
        <label for="subject">Subject</label>
        <input type="text" class="form-control  input-sm " id="subject" name="subject" />
      </div>
    </div>
    <div class="row">
      <div class="form-group col-lg-6">
        <label for="messageLetter">Message Letter</label>
        <textarea placeholder="Message Letter" name="messageLetter" id="messageLetter" class="form-control" rows="10" id="textArea"></textarea>
      </div>
      <div class="form-group col-lg-6">
        <label for="altMessageLetter">Alternative Message Letter</label>
        <textarea placeholder="Alternative Message Letter.&#10;This body can be read by mail clients that do not have HTML email.&#10;capability such as mutt &#38; Eudora.&#10;Clients that can read HTML will view the normal Body." name="altMessageLetter" id="altMessageLetter" class="form-control" rows="10" id="textArea"></textarea>
      </div>
    </div>
    <div class="row">
      <div class="form-group col-lg-6 ">
        <label for="emailList">Email List</label>
        <textarea name="emailList" id="emailList" class="form-control" rows="10" id="textArea"></textarea>
      </div>
      <div class="form-group col-lg-6 ">
        <label for="smtpAccounts">SMTP Accounts</label>
        <textarea placeholder="Random account will be used when sending a message.&#10;1) Format: HOST:PORT:SSL&#10;2) Format: HOST:PORT:SSL:Username:Password&#10;Example: smtp.gmail.com:587:tls:xx@gmail.com:123&#10;Example: smtp.gmail.com:587:nossl:xx@gmail.com:123&#10;&#10;SSL Options: tls , ssl, nossl" name="smtpAccounts" id="smtpAccounts" class="form-control" rows="10" id="textArea"></textarea>
      </div>
    </div>

<div class="row">
      <div class="form-group col-lg-6 ">
      <label for="messageType">Message Type</label>
      <input type="radio" name="messageType" id="messageType" value="html" checked> HTML
      <input type="radio" name="messageType" id="messageType" value="plain"> Plain
    </div>
    <div class="form-group col-lg-6 ">
      <label for="sendingMethod">Sending Method</label>
      <input type="radio" name="sendingMethod" id="sendingMethod" value="builtin" checked> Builtin
      <input type="radio" name="sendingMethod" id="sendingMethod" value="smtp"> SMTP
    </div>
    <div class="form-group col-lg-6">
      <label for="encoding">Encoding Type</label>
      <select class="form-control input-sm" id="encoding" name="encoding">
        <option value="UTF-8" selected>UTF-8 International Unicode</option>
        <option value="ISO-8859-1">ISO-8859-1 Latin 1 (West European)</option>
        <option value="ISO-8859-2">ISO-8859-2 Latin 2 (East European)</option>
        <option value="ISO-8859-3">ISO-8859-3 Latin 3 (South European)</option>
        <option value="ISO-8859-4">ISO-8859-4 Latin 4 (North European)</option>
        <option value="ISO-8859-5">ISO-8859-5 Cyrillic</option>
        <option value="ISO-8859-6">ISO-8859-6 Arabic</option>
        <option value="ISO-8859-7">ISO-8859-7 Greek</option>
        <option value="ISO-8859-8">ISO-8859-8 Hebrew</option>
        <option value="ISO-8859-9">ISO-8859-9 Latin 5 (Turkish)</option>
        <option value="ISO-8859-15">ISO-8859-15 Latin 9</option>
        <option value="BIG5">BIG5 Traditional Chinese</option>
        <option value="GB-2312">GB-2312 Simplified Chinese</option>
        <option value="ISO-2022-JP">ISO-2022-JP Japanese</option>
        <option value="EUC-JP">EUC-JP Japanese</option>
        <option value="Shift-JIS">Shift-JIS Japanese</option>
        <option value="KSC-5601">KSC-5601 Korean</option>
        <option value="EIC-KR">EIC-KR Korean</option>
      </select>
    </div>
    <div class="form-group col-lg-3">
      <label for="priority">Email Priority</label>
      <select class="form-control input-sm" id="priority" name="priority">
        <option value="" selected>Default</option>
        <option value="5">Low</option>
        <option value="3">Normal</option>
        <option value="1">High</option>
      </select>
    </div>
  </div>

<button type="button" id="btnStart" class="btn btn-default btn-sm" onclick="startSending();">Start</button>
<button type="button"id="btnStop" class="btn btn-default btn-sm" onclick="stopSending();">Stop</button>

</div>
  
    <div class="col-lg-6"><br>
        <label for="well">Instruction</label>
        <div id="well" class="well well">
            <h4>Server Information</h4>
            <ul>
                <li>ServerIP : <b> <?php echo $_SERVER['SERVER_ADDR'] ?></b></li>

</ul>
            <h4>HELP</h4>
            <ul>
                <li>[-email-] : <b>Reciver Email</b></li>
                <li>[-time-] : <b>Date and Time</b> (<?php echo date("m/d/Y h:i:s a", time()) ?>)</li>
                <li>[-emailuser-] : <b>Email User</b> (emailuser@emaildomain)</li>
                <li>[-randomstring-] : <b>Random string (0-9,a-z)</b></li>
                <li>[-randomnumber-] : <b>Random number (0-9) </b></li>
                <li>[-randomletters-] : <b>Random Letters(a-z) </b></li>
                <li>[-randommd5-] : <b>Random MD5 </b></li>
            </ul>
            <h4>example</h4>
            Reciver Email = <b>user@domain.com</b><br>
            <ul>
                <li>hello <b>[-emailuser-]</b> -> hello <b>user</b></li>
                <li>your code is  <b>[-randommd5-]</b> -> your code is <b>e10adc3949ba59abbe56e057f20f883e</b></li>
            </ul>
            <h6>by <b><a href="http://<?php echo $owl['website']?>"><?php echo $owl['website']?></a></b></h6>
        </div>

<div id="progress" class="col-lg-16">
          
        </div>
    </div>
 
<script>
 $("#btnStart").attr("disabled", false);
 $("#btnStop").attr("disabled", true);
</script>
</body>
<footer></footer>

</html>